Question about 1994 Toyota 4Runner

1 Answer

Does a 1994 Toyota 4Runner have a Modulator Valve? If so, where would it be located? Also, does it have a Shift Linkage? And if so, where would it be located as well? Thanks!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 778 Answers

If your 4Runner has an automatic trans., then it has a modulator valve located on the trans. itself (should have a vacuum hose connected) and whether it's automatic or standard it will have shift linkage that connects the shift lever in the car to the trans's shift shaft.
I hope this helps.

Posted on Sep 03, 2009

Testimonial: "Thank you for your help!"

  • Frank  Fernandez
    Frank Fernandez Sep 12, 2009

    You're welcome. But if I didn't help you completely, why not reply with a request for additional information? I am grateful, just somewhat of a perfectionist. lol


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trans in drive no mater where the shift is


then your linkage has a problem . get a mechanic to check it for you .

Feb 28, 2016 | 1994 Toyota 4Runner

2 Answers

Why will my 1988 ford van not shift into passing gear


replace modulator valve and check the shift censer I hope that helps

Aug 19, 2014 | Cars & Trucks

1 Answer

Why does my toyota 4runner steering wheel lock while driving


The keyed ignition itself won't stop the lock from engaging. The lock is a spring loaded plunger in the column itself that should be retracted by the keyed ignition. There is wear somewhere in the linkage.

Jul 23, 2014 | 1994 Toyota 4Runner

1 Answer

Hi, The automatic shift lever of my 2003 Toyota 4Runner is been hard to shift up and own. I applied some force and now the automatic shift lever is moving without tension. Please help with solution


The shifter linkage has come loose -- most likely where it's connected inside the console, but the entire length of the linkage needs to be checked.

Charlie

Mar 16, 2011 | 2003 Toyota 4Runner

1 Answer

Code 71


it's a fault witht he EGR system, could be the EGR valve EGR Vacuum Modulator, or according to some information I have found the MAF sensor, could also be something as simple as a broken vacuum line

Feb 23, 2010 | 1994 Toyota 4Runner

1 Answer

Trans. won't shift up to 3rd and over drive


hello, check modulator valve, its on the side of transmissiom towards the back on passenger side, also check and see if your air line is hooked up to the modulator valve, lots of times if air line is not hooked up, it will not shift, or it will shift real hard, have to run motor at high rpm to get to shift, its almost like you put in a shift kit, thats bad on tranny, and check your linkage,. loosen linkage. put truck in netraual, and transmission in netrual also. tighten the bolt, check and see if you have all gears, if not, modulator may be bad or tranny

Feb 06, 2010 | 1996 GMC Sierra

2 Answers

4runner will not idle


check your air idle control valve on the throttle body.

May 11, 2009 | 1994 Toyota 4Runner

1 Answer

Hard to get into first gear-1994 Toyota 4Runner


check the clutch plate fingers for bends and the connecting forks for misalignment or off-center bolts, especially if it was a DIY.

Apr 02, 2009 | 1994 Toyota 4Runner

3 Answers

''88 chevy K2500 won't shift past 2nd gear


Tha vacuum modulator will not keep the truck from shifting,it only helps with sift quallity.it sound like you have some internal problems and will need to take it to a transmission shop

Jan 02, 2009 | 1988 Chevrolet K2500

3 Answers

Transmission wont shift


check the kickdown/throttle valve cable. It may be bound up and stuck in the maximum position giving you extremely late shifts.

There ISN"T any modulators or vac lines on any Chrysler automatics

Nov 08, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Toyota 4Runner Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...