Question about 1994 Oldsmobile Bravada

1 Answer

94 bravada temp.gauge not working on dash could it be temp.sensor

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Oldsmobile Master
  • 3,854 Answers

It could be the sensor or the wire harness it self where it connect's the the sensor. There is just one lead wire and it may be damaged due to corrosion or a broken wire. Check the wire first before replacing the sensor, remember the Bravada is 15 years old. Good luck friend and keep me posted, be glad to know you got your Olds running 100% again. 

Posted on Sep 03, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the gages located for fuel, battery,& temp on 2002 olds bravada

Check for a blown fuse under the dash. It will be marked gauges or instruments.

Jun 14, 2017 | Cars & Trucks

1 Answer

Where is a temp gauge sensor located on a 1999 Oldsmobile bravada?

Which one? There should be a sensor for the dash gauge (one wire) and a coolant temp sensor for the ECU (two wires) and also a sensor for the outside temp display (no idea where this last one is--I just open the window if I want to know). The first two should be on the intake manifold, near the thermostat housing.

Jul 10, 2015 | Oldsmobile Cars & Trucks

1 Answer

Where is heat sensor on 1994 geo metro

why not post symptoms. or hint at to what sensor
there are many heat sensor on all suz, 94 (heck all cars EFI)
ECT, engine coolant
sensor for dash gauge , coolant temp
A/C overheat sensor. (engine)
IAT< Induction air temp.
at the least

May 09, 2014 | Geo Metro Cars & Trucks

1 Answer

Temperature sensor not working

If you are talking about the temp gauge on the dash, the gauges get power from the same source. If the gas gauge works, the problem could be the temp sensor on the engine block.

Jan 22, 2013 | 2005 Kia Sorento

1 Answer

1990 gmc K1500 5.7L, temp. gauge not working:

To review, you have two temp sensors, one for the gauge on the dash and one for the computer. If you unplug the sensor for the computer the reading will be minus 30 degrees or over 300 which will make it very hard to start. Unplugging the sensor for the gauge would have no effect on the computer.
According to the wiring diagram, the wire for the temp gauge is green, and the wires for the temp sensor for the computer are yellow and black.

Aug 24, 2012 | 1990 GMC Sierra

1 Answer

Where is the computer located on a 94 oldsmobile bravada

Front seating area, passenger side, under dash, passenger side of glove compartment cavity, mounted on firewall

Jul 14, 2010 | 1994 Oldsmobile Bravada

1 Answer

I have a 91 bravada all gauges work but my temp can some help

Find and check the temperature gauge sensor 'sender' unit on the engine.
To test:-
- if you ground the wire connected to the sender the gauge should go to full scale high,
- open circuit the gauge should read zero (nil deflection).
If above test ok, replace the temperature sender unit with correctly specified item.

Jul 11, 2009 | 1991 Oldsmobile Bravada

1 Answer

94 olds hard starts when warm, starts when cold and runs rich

If you can get a fuel pressure gauge, check and see if the pressure is 16 to 24 lbs after the engine has warmed up.
I would connect the pressure gauge when the engine is cold, make sure it does not leak or touch anything hot, place the gauge between the hood and the windshield and drive the vehicle until it is at the temperature you feel it "starts hard". Shut the engine off and try to repeat the no start or hard start and make sure the pressure is correct.
Also, when you shut the engine off, watch the pressure and make sure it holds and does not drop to (0 LBS) of pressure.
One last question, has the fuel filter been changed in the past 30K.
Let me know.

May 08, 2009 | 1994 Oldsmobile Bravada

1 Answer

Outside Temperature gauge

Most likely the temp sensor which is in the front of the radiator support was damaged, I would suggest you take it back and make sure that it is hooked up and not damaged by the accident.

Nov 04, 2008 | 1998 Oldsmobile Bravada

Not finding what you are looking for?
1994 Oldsmobile Bravada Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides