Question about 1994 Lincoln Town Car

1 Answer

Oil leak near Oil Sensor of 1990 Lincoln Towncar. How does the sensor come out and the wires disconnected?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,049 Answers

The wires are attached to the oil sensor with a small clip. Disconnect the wire from the oil sending unit by simply pulling it off the unit. Use a deep socket (1 1/16) to remove unit.

Posted on Sep 03, 2009

Testimonial: "Got the wire off. Looks like a special socket to get the sensor off. Thanks for the fast response"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 lincoln towncar cartier airbags not working airbag light flashes 4 time then pause then repeat


it is the sensor mine has been doing it for years you will tell when it is ot working because it will not go off

Mar 18, 2017 | 1990 Lincoln Town Car

1 Answer

Fuel tank pressure sensor


replace fuel pressure sensor

Sep 24, 2013 | Lincoln Cars & Trucks

1 Answer

How do I replace rear parking sensor on lincoln towncar


Disconnect battery, find sensor, replace sensor, re-connect battery

Mar 09, 2013 | Lincoln Town Car Cars & Trucks

1 Answer

Oil leak near oil-temp sensor and oil filter


A common problem with leaking oil filters is that they were either cross threaded or the old rubber gasket stuck to the filter mount and now there are 2 filter gaskets there which could leak. As far as the oil sensor you amy be able to tighten it down after removing the wiring harness to make it stop leaking.

Feb 24, 2011 | 1995 Lincoln Town Car

1 Answer

I did a oil change on my 1994 gmc suburban w/5.7L and it started leaking oil on the back of the motor by the intake and the brass fitting for the oil pressure sensor. It is a steady leak and will lose all...


OK, does it appear that the oil pressure sensor is leaking through the plastic to metal seam (on the sensor itself)?

Have had an oil pressure sending unit go bad and leak on a 1990 Oldsmobile Cutlass Calais that needed to be replaced.

REMOVAL & INSTALLATION C1500 Suburban 1994
  1. Disconnect the negative battery cable and drain the engine oil.
  2. Disconnect the sensor electrical lead and unscrew the sensor. The sensor can be found on the top side of the engine, near the distributor. To install:
  3. Coat the first two or three threads with sealer. Install the sensor and tighten until snug. Engage the electrical lead.
  4. Connect the battery cable and fill the engine with oil.

Jul 14, 2010 | 1994 GMC Sierra

1 Answer

The back of the towncar wont lift up like normal its a lincoln 1994 towncar


mcdevito75 here, Could be one of the air lines leaking, a bad spring or shock or the level sensor not working. Your local shop should have a look.

Jun 16, 2010 | 1994 Lincoln Town Car

1 Answer

What might be causing the antifreeze to leak on my 92' towncar


If the sensor that you are talking about is mounted in the water line then it could be the sensor leaking through it,pull the wire connection out and see if it has water in it

May 14, 2010 | 1992 Lincoln Town Car

2 Answers

Lincoln Towncar 1999 turns over great. Has a new


check the spark plugs to see if they are getting any spark-pull one of the plugs, reconnect the wire, and hold near something metal on the car while someone turns the engine over-if no spark-it's electrical-maybe just the plugs-maybe something more serious

Aug 28, 2009 | 1999 Lincoln Town Car

2 Answers

Rough idle after initial startup.


Really the sky is the limit here. See when you first start vehicle the computer is in open loop which means it is not monitoring the O2 sensors and fuel control is set to a calibrated setting. After the Heaters heat up the O2 sensors it then goes into closed loop and starts monitoring the O2 sensors to control air/fuel. So anything in the fuel and air mix could be causing your problem like false air volume reporting from the MAF sensor,a vacuum leak,unmeasured air getting into the engine behind the MAF sensor from a leaking hose,,a faulty pcv system,lazy O2 sensors, etc.
I would first recommend cleaning the MAF sensor and resetting the keep alive memory.Get a T20 torx bit and remove the MAF and get some electrical cleaner and spray the MAF bulbs clean then let it air dry or blow it dry with light shop air. Then disconnect battery for about 30 minutes to reset the strategies and see if this cures your problem. It will take probably 50 miles of driving for the strategies to reset.

Apr 15, 2009 | Lincoln Town Car Cars & Trucks

1 Answer

1990 lincoln towncar no start


camshaft position sensor controls fuel injector timing.

Jan 08, 2009 | 1990 Lincoln Town Car

Not finding what you are looking for?
1994 Lincoln Town Car Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...