Question about 2000 Toyota Celica

1 Answer

Toyota celica vvti key programming

Hi
I have a 2000 vvti celica and i need to programme another key remote.it has the two button key version.the car has the little LED on the dash with sucurity writen underneath the LED. any help would be welcome
thanks
Jim

Posted by on

  • blcbob Sep 03, 2009

    HI
    does this put the car in programme mode. or is this done with the new key
    Thanks for the response

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 548 Answers

Put key in ignition. Hold down one of the key buttons and hold it down while you turn the ignition on. Door locks should pop up and down. Then release button and remove key.

Posted on Sep 03, 2009

Testimonial: "Thanks for the feedback. . is this programing done using the new key first or do i need to use my old key to start the Programming process thanks"

  • Freddyyesme Sep 05, 2009

    use the new key only

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota celica vvti 2000


The first thing is to have the computer scanned for codes. the check engine light should also be on with the engine idle too high.Scanning for codes is the best first step in finding the problem.
this could be caused by a vacuum leak or bad throtle postion sensor or mass air flow sensor and more.Go to an auto zone or other auto parts store ,they will scan the codes and give you a print out of the codes. get me the codes and i will try to help you solve this problem.

Mar 02, 2012 | Cars & Trucks

1 Answer

Need a workshop manual for a 2000 Toyota Celica vvti (140)


You can get the original Toyota dealer service manuals at faxonautoliterature.com. I've used them before and had excellent service. Hope this helps.

Sep 06, 2010 | Toyota Celica Cars & Trucks

1 Answer

2000 Celica GT - I can get into the programming mode just fine, but I have tried to program THREE separate remotes and none of them will program. They are used, so I am "rewriting" them, but they never...


I saw this on one of the toyota forums;
1) Getting a Replacement Remote

Look on ebay or google, make sure the remote has the following FCC-ID: bab237131-056

2) Installing the remote (credit to iPal)

1 open door, take key out...

2 insert and remove key from ignition 2 times

3 close and open driver's door 2 times

4 insert and remove key from ignition

5 close and open driver's door 2 times

6 insert key into ignition

7 close door

8 turn ignition from 'lock' to 'on' and back to 'lock'

if you do step #8

*1 time it's for add mode

*2 times for rewrite mode

*3 times for confirmation mode

*4 times for prohibition mode

9 remove key

10 then door lock will cycle 'lock' and 'unlock' a number of times
corresponding to your key cycles in step #8

11 press lock and unlock button together for 1 ~ 1.5 sec then release

12 then within 3 sec press lock button for 1 sec then release

13 if you did correctly door lock will cycle once...

if wrong, twice... then do it over...

Jan 27, 2010 | 2002 Toyota Celica

1 Answer

Toyota 1.8 vvti celica key thob alarm problems


THE FACTORY KEY FOBS ARE IDENTIFIED BY
THE NUMBER OF BUTTONS AND THE NAME ONE THE BACK
IE: DENSO, TRW, TOYOTA,NGK OR BOSH
BUT THE REMOTE THE YOU DISCRIBE SOUNDS LIKE YOU HAVE AN AFTER MARKET REMOTESTART/ ALARM SYSTEM

Oct 23, 2009 | 2000 Toyota Celica

1 Answer

Toyota 2000 Landcruiser Pardo remote need to reprogram


forgive my poor english/do U have a challanger alarm in Your car?If U have U must programm Your pilot in service because challenger has a radio device to programing pilot to the system

May 17, 2009 | 2000 Toyota Land Cruiser

1 Answer

WHERE'S THE OXYGEN SENSOR IN MY CELICA VVTI?


Hi,
can't tell you exactly where it is, but it will be on the first section of the exhaust (usually within a fooy or so of the manifold). There are a few types of Lambda sensor but they basically do the same thing. If you are a bit of a handy man, consider buying a universal sensor off ebay, they are much cheaper and just as good. You will have to use your original connector, so you'll need a pair of snips and some electrical connectors (scotch blocks etc)
In your ebay search type "universal lambda sensor"

hope this helps.......Dave

Jun 15, 2008 | 2000 Toyota Celica

Not finding what you are looking for?
2000 Toyota Celica Logo

Related Topics:

1,480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8729 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...