Question about 2003 Kia Sedona

1 Answer

Hi we have a kia carens 2002 the driver door handle mechanism has snapped we need to find a replacement part fast please advise suppliers with reasonable prices

Posted by on

  • Anonymous Mar 14, 2014

    I'm lookin for Royce Brand brush cutter and chainsaw suppliers

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 548 Answers

I would first try the local junkyards in your area if not jusdt try shopping online for the part www.kiacarparts.net is one source

Posted on Sep 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my engine shake on my 2002 KIA Rio while in park and while driving? The shaking goes all the way to the steering wheel?


Hi there.!
  1. This sounds suspiciously like one or more of your engine mounts have deteriorated. If this Is Indeed the case, and It has been going on steadily worsening over time, I would advise you to replace all four.
  2. I often find when having problems with my car, that seeking advice from a local car spares supplier before going to a mechanic can be helpful as they are less Inclined to give the sharp Intake of breath which often accompanies the garage quote...!
Please rate If this helps.

May 21, 2015 | 2002 Kia Rio

1 Answer

My 2002 jaguar vanden plas driver side door handle is broken it want open from the inside.


remove it and replace from a used car part supplier, if it is the mechanism take door card off carefully and inspect for any broken or damaged connecting parts

Nov 07, 2013 | Cars & Trucks

1 Answer

Kia carens/rondo faulty interior door handle


pull off the door panel an check to see if the striker rod is connected. it is a thin long steel bar...if the handle is broken remove the door panel an replace the handle

Jul 12, 2011 | Kia Rondo Cars & Trucks

2 Answers

My 2004 kia carens got overheated and could not start, i had it dragged by another car was this a good ideae


My Kia carens 1.8 have temp problem after changing radiator and water valve compartment repaired. Water is still maintain in radiator which it was drinking water before that. But now temp go up and down , I could not diagnose the problem please advise.

Apr 16, 2011 | Kia Sorento Cars & Trucks

1 Answer

Kia carens 2003. (UK) Don't know alternate name.


take out all the screws in the door handles etc,slide the chrome suround forwards on the interior doorpull and remove.then, very carefully prise off the inner door panel(use a Y tool for the clips,or a wide screwdiver..you will break some) with the window up,you will be able to see a wire hanging down from the outside handle,it is the clip that holds this on that is broken(very common)if the clip is okay then you will have to see what else is needed.but it will be obvious.

Aug 13, 2010 | 2005 Kia Rondo

2 Answers

How to fit a wheel bearing to a kia carens front wheel.kia carens is not in the drop dowm menu


It is only a four bolt sistem to change after the brake *** is removed. U may also have to remove the upper and lower control arms.

Aug 10, 2010 | 2002 Kia Sedona

1 Answer

KIA CARENS Drivers door wont open its almost like the handle loose


FIRST: If it is under warranty, take it to the dealer!
If not, from your rather limited description it sounds as though the attachment rod that operates the latch mechanism is either so loose or disengaged that it will not rotate the security latch to "unlock" your door. Open up the attachment point and the panel to determine what exactly has loosened or failed and replace the hardware and then properly secure eveything.

Mar 13, 2010 | 2001 Kia Optima

1 Answer

Kia sedona outside door handle replacement


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to get to remove the bolts securing the outer handle on

Sep 01, 2009 | 2002 Kia Sedona

2 Answers

DOOR WONT OPEN


My 2002 Kia Rio with manual locks also wouldn't unlock. the connecting rods would bend enough that I could pull the inside plunger up or turn the key, but in either case it would snap back when I let go, and the door remained locked.

The problem is a broken spring at the latch mechanism. Getting it unlocked is a matter of wiggling and banging the handles and lock until the lever the spring is supposed to control moves. The lever is in line with the car, so gravity might help if you park facing uphill or downhill. I wish I'd inspected the latch carefully enough to tell which.

Once the door is open, remove the interior door panel. The hard part is the window crank: push the heavy wire clip off the crank's shaft between the crank and the panel. Save the plastic sheet inside the panel; it protects the mechanisms from collecting moisture in your interior and rusting. A few screws and a snap or two will allow you to lift the panel up off the inside lip of the window.

The latch is held in by the 3 big screws in the door's edge, but you also need to disconnect some connecting rods that go to the various latch and lock handles. The plastic clips that hold the rods into their levers can be rotated to unsnap from the rod, the the rod can be pulled easily our of the clip. You'll see when you try it.

On mine, I found a broken spring that had connected two hooks right across the top of the latch mechanism. I came online to find a replacement spring or mechanism and ended up here, but my rubber band I cut from a bicycle inner tube is working fine for now.

Go ahead. Say something about fixing a broken Kia with a rubber band.

Sep 05, 2008 | 2002 Kia Rio

Not finding what you are looking for?
2003 Kia Sedona Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...