I had to remove this due to my wife pushing the center cup holder off of the track. to remove it you need to remove both side panels of the console. you can do this by pulling on the sides, they have clips holding them. i also had to unscrew the front of the console door to gain access. take your time and dont pull too hard and you should be able to get it. before doing that, try reaching your hand around the back of the console to see if you can reach. it is hollow back there. good luck
Print I hope this helps you,good luck.Randy
Removal & Installation
Instrument Panel
Fig. View of front floor console and shift bezel
Fig. View of front floor console, showing attaching screws
Fig. View of floor brace, attaching nuts, center brace, and floor bracket
2,275 views
Usually answered in minutes!
a piece of jewlery has fallen where the slide on the console slides and folds into the box
Thanks, Dave, for your answer.
×