At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
indicator relay is stuck usually open and close to flash light but if it has arcked it will keep it on all the time. and put side lights on, on this side when engine is off and parked. also controls the hazzards
probley popped a fuse mate check ya user mannal for the fuse you need to change or seach online for your type of car should tell you there i done it bear times when changing new radio but never heard of it blowing the turn signals and hazzards normaly just pops the radio fuse
if your hazzards flash, that means your bulbs will be good but, your turn signal fuse is blown. you should check that first, & don't forget to turn off your hazzards before you can see if your turn signals work again. give it a try.
The hazzard switch overrides the turn signal circuit. If it's stuck on, there will be no turn signals. You will have to repair or replace that hazzard switch to get your turn signals to work again.
The turn signal flasher is separate from the hazard flasher and that is the problem that you need to look at.I can''t tell you where the flasher is but i am 95% sure that a new flasher will fix your problem,otherwise that hazards would not work either.It still could be the turn signal switch but that is a rarity.
If you still have flasher problems, I read on Google to spray WD-40 down in and around the hazzard flasher button, then press it up and down several times...and BINGO...all flashers and signals worked again....just had some dirt and dust in the wiring....
×