I NEED THE CODE TO MY JETTA RADIO, IS NO THE FACTORY RADIO, IS THE SAME OEM MODEL, THE SERIAL NUMBER IS VWZ4Z7A6036630, THANKS

Factory radio usually requires a dealer to obtain it based on either the vin or serial number of the radio.

You can get Ford radio codes emailed to you from here for a small fee, I have used them before......excellent guaranteed service: Ford Radio Codes United Kingdom Gumtree

i doubt if the radio will need a code as its stock but aftermarket so if it does have a code this will come with the radio ,the code for your radio will not work in the new one .that i can tell you with confirmation

The reset code for the factory installed radio is on a sticker in the glove box. The sticker has 2 set of numbers. The number set with 5 digits is the reset code for your factory installed radio.

If I'm for sure I don't think your digit code would be with the vin #. I would check your owners manual or ask a Honda mechanic. Hope this helps!?

Please rate solution - Thanks

To get the code, you can to go to a VW dealer, or you can try their
website support page and e-mail them that you need your radio code all they need is your VIN# and your radio serial # to get it for you...
I got for mine at a dealership, they ran the serial number on the radio and gave me the unlock code for free.
Hope this helps you!

Check inside your trunk wheel well by the spare tire. In some years they put the radio code on a sticker in that location. Otherwise you will need to take the radio serial number to the dealer along with your VIN number. They can then give you the code. Better if it's the original radio with the car.

The radio will have to be removed from the car dashboard

.Then please quote the MAKE + MODEL of your radio plus ALL the LETTERS and NUMBERS on any LABELS , BARCODES or STAMPED IN THE METAL CASING.


Also quote the MAKE of CAR it is fitted into.

Note : Not all stereo codes can be calculated using the Serial Number.

I need the vwehicle VIN number and the radio serial number etched on the radio and I can get it for you. You have to remove the radio to see it though

Factory radio codes are an anti-theft deterrent, they are unique to each radio and car serial number, in order to get the code the dealer will have to access the manufacturers data base, you will need to pull the radio and record the radio model number and the serial number of the chassis of the radio and take it to the dealer, they will not in most cases give the info out over the phone, this would defeat the whole purpose of the code.