1995 M3 Electric Window Problem

Engine compartment

Toyota Matrix - fuse box - engine compartment

Instrument panel

Toyota Matrix - fuse box - instrument panel

Fuses (type A)

Fuse Ampere rating Description 1 FOG 15 Front fog lights 2 HEAD LH UPR 10 Left?hand headlight (high beam) 3 HEAD RH UPR 10 Right?hand headlight (high beam), high beam indicator light 4 SPARE 30 Spare fuse 5 SPARE 15 Spare fuse 6 SPARE 10 Spare fuse 7 ETCS (1ZZ?FE engine with two?wheel drive models only) 10 Electronic throttle control system 8 AMP 30 Car audio system 9 MAIN 30 Starting system, "AM2" fuse 10 DOME 15 Car audio system, clock, personal lights, interior light, trunk light, open door warning light, wireless remote control system 11 HORN 10 Horn 12 HAZARD 10 Emergency flashers, turn signal lights 13 EFI 15 Multiport fuel injection system/sequential multiport fuel injection system, emission control system, "EFI" fuse 14 ALT?S 5 Charging system 15 HEAD LH LWR 10 Left?hand headlight (low beam) 16 HEAD RH LWR 10 Right?hand headlight (low beam) 17 EFI2 (1ZZ?FE engine with two? wheel drive models only) 15 Multiport fuel injection system/ sequential multiport fuel injection system, emission control system 18 TAIL 15 Tail lights, license plate lights, instrument panel lights, instrument cluster lights, clock 19 OBD 7,5 On?board diagnosis system 20 WIPER 25 Windshield wipers 21 AM2 15 Charging system, multiport fuel injection system/sequential multiport fuel injection system, starting system, SRS airbag system 22 STOP 15 Stop lights, high mounted stoplight, anti?lock brake system, shift lock control system, multiport fuel injection system/sequential multiport fuel injection system, cruise control system 23 DOOR 25 Power door lock system, glass hatch opener switch 24 AM1 25 "CIG" fuse 25 ECU?IG 10 Electric cooling fan, anti?lock brake system, traction control system, vehicle stability control system, brake assist system, shift lock control system, cruise control system 26 RR WIPER 15 Rear window wiper 27 A/C 10 Air conditioning system 28 INV 15 Power outlet (115 VAC) 29 P/POINT 15 Power outlet (12 VDC/ in the rear console box) 30 ECU?B 10 Daytime running light system 31 CIG 15 Power outlet (on the instrument panel) or cigarette lighter, car audio system, clock, power rear view mirror control, shift lock control system 32 GAUGE 10 Gauges and meters, air conditioning system, daytime running light system, charging system, auto anti?glare inside rear view mirror, power windows, cruise control system, rear window defogger, back?up lights, front passenger's seat belt reminder light 33 WASHER 15 Windshield washer, rear window washer 34 M?HTR/DEF I?UP 10 Engine control system

Fuses (type B)

Fuse Ampere rating Description 35 ABS NO.1 30 Anti?lock brake system, vehicle stability control system, traction control system, brake assist system 36 RDI FAN 30 Electric cooling fan 37 ABS NO.2 40 (without vehicle stability
control system) Anti?lock brake system 50 (with vehicle stability
control system) Anti?lock brake system, vehicle stability control system, traction control system, brake assist system 38 HEAD MAIN 40 "HEAD LH UPR", "HEAD RH UPR", "HEAD LH LWR" and "HEAD RH LWR" fuses 39 AIR PUMP 50 (1ZZ?FE engine with four?wheel drive models and 2Z ?GE engine only) Emission control system 40 HTR 40 Air conditioning system 41 DEF 30 Rear window defogger, "M?HTR/DEF I?UP" fuse 42 POWER 30 Power windows, electric moon roof

Fuses (type C)

Fuse Ampere rating [A] Description 43 ALT 100 Charging system, "ABS NO.1", "ABS NO.2", "RDI FAN", "FOG", "HTR", "AM1", "POWER", "DOOR", "ECU?B", "TAIL", "STOP", "P/POINT", "INV" and "OBD" fuses WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

could be sticky glass guides
or replace the window motor

Do not know of a "Window Relay" for a 2-door M3 convertible. But there is a "Window motor to regulator" in the door itself.
However, there are two 30 amp fuses (#14 and #19) located in the plastic front power distribution box located in the left-hand rear corner (nearest the driver) of the engine compartment that I would check to see if this is your problem before digging down into door interior disassembly. The numbers are marked look under box cover.

open the door interior light will be on put the vehicle ignition in run postion dash lights will be on operate the window switch up and down look at dome light if it is dimming a little when operating switch window motor is no good if not remove the switch and check power at switch if none the boot between the body and door has a broken wire

No idea offhand as these problems are not related but i do suspect the wires in the door from door pilar to door are damaged causing a fuse or two to blow ,as for the window well if its making a grinding noise then it needs a new mechanism as the cables are crunching up around the drive pulley ,new unit complete and its about a 100 euros

Does the van have remote keyless entry (RKE) system ?
Interior Lighting System Description
Vehicles with the optional remote keyless entry (RKE) system have interior lighting controlled by the body control module (BCM).
This vehicle uses a delayed interior lighting system.
The system functions as follows:
• The dome lamps will illuminate when any door is opened.
• The dome lamps will remain on for 20 seconds after the last door is closed.
• The delay is canceled and the dome lamps will go out when the ignition switch is turned to the ON position.
• The illuminated entry function will not operate when the dome lamp defeat switch is in the OFF position.
• The interior lighting system is protected from battery rundown by the retained accessory power (RAP) system. The RAP system functions by shutting down interior lights after 10 minutes (when ignition is OFF).

Interior Lights Circuit Description
When the interior lamps circuits are closed/enabled, the courtesy lamp relay is activated by the two following coil circuits:
• CKT 690 (GRY/BLK) which is the courtesy lamp enable output of the body control module (BCM) driving the coil side of the relay.
• CKT 1732 (ORN) which is the coil output side of the relay going to the potential grounding switches/sources.
When the courtesy lamp relay is enabled, CKT 156 (WHT) (courtesy lamp output) is enabled by the closed contact at the relay and then grounded by CKT 750 (BLK) at G110.
Some of these circuits can also be activated with the headlamp and panel dimmer switch. When this happens, the coil output side of the inadvertent power relay is grounded to the body control module (BCM) via CKT 1393 (DK BLU)
CKT 40 (ORN) from the courtesy fuse drives both input sides of the inadvertent power relay. When the contact is pulled closed, CKT 1732 (ORN) is supplied power, thus driving any lamps/circuits attached that circuit and providing ground.
The body control module (BCM) also monitors the following four door inputs:
• CKT 49 (DK BLU) -- LH door jamb switch input
• CKT 54 (ORN) -- RH door jamb switch input
• CKT 775 (PNK) -- Side door jamb switch input
• CKT 656 (YEL) -- Rear door jamb switch input/liftgate strut switch input (depending on option content)
When the doors are closed, the body control module (BCM) is in a floating state of 0-2 volts. When the doors are opened, the courtesy lamp relay is activated, sending power to the courtesy lamps.
The headlamp and panel dimmer switch also activates the following interior courtesy lamps when the switch is placed in the PARK or HEADLAMP ON positions:
• RF power window switch
• RH power door lock switch
• LH power window switch
• LH power door lock switch
• LH outside rearview mirror control switch
• Rear radio control head
The dome lamps can be disabled by closing the dome lamp defeat switch located on the headlamp and panel dimmer switch.

--------------------------------------------------------------------------------
Courtesy or Dome Lamps Inoperative
Step
Action
Value(s)
Yes
No
Important: Verify functional bulbs before beginning diagnostic procedure.
1
Did you perform the Lighting Diagnostic System Check?
--
YES - Go to Step 2
NO - Go to Diagnostic System Check - Lighting Systems
2
Are all of the courtesy/dome lamps inoperative?
--
YES - Go to Step 6
NO - Go to Step 3
3
Activate courtesy/dome lamps
With DMM, check for battery voltage from inoperative lamp CKT 1732 (ORN) to ground
Is battery voltage present?
B+
YES - Go to Step 4
NO - Go to Step 5
4
Repair open in CKT 156 (WHT) between inoperative lamp assemply and S214.
Is the repair complete?
--
NO - Go to Step 10
--
5
Repair open in CKT 1732 (ORN) between inoperative lamp assemply and one of the following splices:
• S258
• S301
Is the repair complete?
--
Go to Step 10
--
6
Turn the courtesy lamp switch to the ON position
Check for battery voltage at BCM C2 cavity B12.
Is battery voltage present?
B+
Go to Step 7
Go to Diagnostic System Check - Body Control System in Body Control Systems
7
Verify continuity of the following three circuits with DMM:
• CKT 1732 (ORN) between courtesy lamp relay and body control module
• CKT 156 (WHT) between courtesy lamp relay and S214
• CKT 750 (BLK) between courtesy lamp relay and S206
Are all of the circuits functional?
--
Go to Step 8
Go to Step 9
8
Replace courtesy lamp relay.
Is repair complete?
--
Go to Step 10
--
9
Repair the inoperative circuit.
Is the repair complete?
--
Go to Step 10
--
10
Operate the system in order to verify the repair.
Did you correct the condition?
--
System OK
Go to Step 2

When you press the window switch button for the passenger door window turn on the dome light at the same time, carefully watch if the dome light dims slightly, this means the switch is ok and the passenger window electric lift motor is defective. You can also try stricking the bottom of the door while holding the switch down, this may cause the window motor brushes to unstick and the window will work for awhile again.

This can be solved by following the instructions on this link. http://www.bmwe36blog.com/2007/02/24/reset-bmw-e36-oil-service-light/

checkyour vacuum hoseson your pollutiongear

another sensor....???