My 1990 525 has had electrical problems in the past. The same problem has happened again. The power...
(More)
My 1990 525 has had electrical problems in the past. The same problem has happened again. The power windows, power locks, sunroof, radio and on board computer stopped working. I replaced relays under the back seat about a year ago and it corrected the problem. It is happening again. I also experienced a melted fuse in the main fuse box in the engine compartment a few months ago where I had to break out the melted fuse so that I could get a new one in. It was fuse #25 which is a 30 amp fuse for the auxiliary fan. After cleaning the contacts and replacing, the fan worked again. I don't know if this is related to the window problem. The relay that was replaced to correct the window problem has a part #601.576. I don't remember if I replace both of them. They both now have discolored contacts. I don't know if this is from normal current flow or if they too are getting hot. Any suggestions would be greatly appreciated.
Bruce
i have trouble turning over my 530d, battery/starter motor/alternater all ok,sometimes it turns over...
(More)
i have trouble turning over my 530d, battery/starter motor/alternater all ok,sometimes it turns over ok, sometimes it sounds like the battery is flat
HI I have a 530 deisel, 1999 model and I parked it outside a bank with engine off but ignition left...
(More)
HI I have a 530 deisel, 1999 model and I parked it outside a bank with engine off but ignition left on. When I returned the car would not turnover or start. I took the key out and all the electrics are still on, ie air con, radio, dash board lights etc, although the central locking did not work. When I put the key in the car does not turn over or anything, it feels like the barrel has siezed on, or has perhaps the started moter jambed. Can anyone assist, if it is the ignition barrel is it an easy job ot change it?
I need to know how to enter the reset code for 535i. I have the mfg's code. I accidently pressed...
(More)
I need to know how to enter the reset code for 535i. I have the mfg's code. I accidently pressed code button and alarm went on and will not shut off.