Diagram of 1993 sepentine belt needed

Serpentine belt tensioner replacement on a 1992 dodge ... on you tub

You got to buy a shorter belt serpentine belt that bypasses the AC unit most car have a diagram showing whit and whit out AC.

We do not have this application in our catalog

Hopefully you mean a sepentine belt and not the timing belt. There is a diagram under the hood for the serpentine belt. Look on the radiator shroud or close to it. The timing belt requires a great deal of engine disassembly and probably is more that most home mechanics can handle.

Which engine?
To replace the drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power steering share a belt with a separate belt for the AC. Dodge recommends checking the belts every 15,000 miles or 12 months for possible replacement. I have gone 3 yrs with one.. it will start squealing when you turn on the heater to defrost..

http://www.automd.com/46/how-to-replace-a-serpentine-belt/

Most replacement belts have a diagram on the package. However, the easiest way is to pay close attention to the belt you are taking off, and replace the new one the same way. The pulleys themselves are usually 'grooved' or 'smooth' which tells you whether the front or back of the belt is against it. The hardest part is figuring out how to release tension on the idler-pulley. If you can get the belt on and the idler/tension pulley (same thing) pulls the belt tight, chances are you got the belt right. If you don't know what I mean, then the mostest best way is to get a Clymer Manual and read up. Its really a simple thing to do yourself.

I used a long heavy duty screw driver to release the tension on a Pontiac Sunbird.. the belt will only fit on one way..

CLICK on the following LINK. It has the Sepentine Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/mazda/model/6/2004_mazda_6_drive_belt_routing_diagram.htm

4cyl? 6 cyl? Check Gates belts, they have diagrams.

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

This is the belt routing diagram for a Chrysler NY Salon 3.3L 1993
model. Hope it helps you. Gregg.