At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Electric window on front passanger side when closed by the master switch on the drivers door will open on its own accord and it could be a few minuets before the master switch can close it again, the dedicated switch on the pasanger door does not work.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do the power door locks work for that door ? Does you vehicle have door courtesy lights , turn signals on the mirror ? If your vehicle has these other options an they work , you have power to the door . There is an electronic module inside the door ,called passenger door module ! where did you check for power at , the window switch ! These are computer controlled an you would only see a few volts when pushing the switch !
7
Monitor the passenger front window status in the passenger door module inputs list.
Activate the passenger power switch on the passenger door module in the up and down positions.
Does the window status data parameter change accordingly?
Go to Step 8
Go to Step 15
8
Monitor the passenger front window status in the driver door module inputs list.
Activate the passenger front power window switch on the driver door module in the up and down positions.
Does the window status data parameter change accordingly?
Go to Step 9
Go to Step 16
Operate the passenger front power window in the UP and DOWN directions from the master switch.
Does the passenger front power window operate properly from the master switch?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 5
4
Install a scan tool.
Monitor the window lockout data parameter in the driver door module inputs list.
Activate the window lockout switch to both the On and OFF positions.
Does the window lockout data parameter change state appropriately?
Go to Step 5
Go to Step 16
Your best bet is to take this to dealer or a ASE certified repair shop.
Each system is bad. The windows need regulators(they come with motors) the radio probably died(check fuse). And the mirror switch is bad(Since you still have power to the drivers window).
I have a 2005 Mazda 3. The driver's side power window won't go down...the other 3 windows do (from the left door power switch). When I try to open the driver's window, I hear a noise...maybe like a motor switch?
My 1998 passat done the same, try remove the drivers side window/childlock control on the armrest and clean the multipoint switch as that got my drivers side door opening/closing on the fob as well as the passenger rear door unlocking and working again as it was deadbolted and would not open inside or out.
Check fuses and relays first. Second, try to get a testlight on the electrical wiring going directly into the switches for the windows. Is there electricity going in? If yes, then you may have a faulty switch. No? Then trace backwards and see why there is no juice. Also, check to see if the power window switches on the passenger doors work. It is unlikely that all the door regulaters and/or motors have failed simultaenously. This sounds like electrical. In other words, the juice may not be getting to where it should. Any small shop with ALLDATA would be happy to print you the electrical schematic on your car, if you feel up to this. If not, most shops may find the problem for you at no chrage and then just quote you on what it woul take to fix.
×