there is no problem with the car at all i just want to keep the car in great condition so i was just wondering what regular maintenance is the most important and needs to be done regularly besides the oil change?
Filters oil and air, Lube door hinges. check air in tires often, for better fuel milage. and the tires won't wear on the outside and inside tread with the right air.. also its good to rotate your tires every 2000 to 3000 miles, And check the balance. most tire stores will rotate and balance tires for free after you pay one time. and they will also pull the brake drums on the rear, and inspect brakes free. will look at disk pads all for free. they would like for you to let them fuix it if they find anything that needs done. i worked at goodyear tire for 16 years as a service mgr. hope this was helpfull to you. I would be glade to give more tips if anyone wants to contact me. sawdust46
New timing belt and serpentine belt every 50,000 miles. New filter with every oil change. Replace the air filter when it gets so that you can't see diffuse light through it. Watch fluid levels. Have the CV joints and rubber boots checked every 20,000 miles or so. Check with your transmission servicer for fluid and filter changes. Replace platinum spark plugs every 100,000 miles along with new spark plug wiring. Check the codes if the check engine light comes on. Replace the fuel filter ever 20,000 miles--more often if poor fuel quality.
Rearview mirrors controls quit working. I do not see any fuse locations in the manual. Swithing the...
(More)
Rearview mirrors controls quit working. I do not see any fuse locations in the manual. Swithing the control from the left or right mirror is no help. Both seem dead, They do not automatically change with the memory settings either. What is the problem?
I have an acura rl with music link connection in the glove box. It has been working perfectly unitl...
(More)
I have an acura rl with music link connection in the glove box. It has been working perfectly unitl about 3 weeks ago when the connection just seems to have failed. Does anyone know how to make sure the cable is connected to the system?