Question about Ford Cars & Trucks
You can get this from a Chilton's or Haynes book easily you didn't specify engine size and torque specs are different for each motor you must go to a auto parts store and get your book for specific torque for your motor otherwise you will get the wrong specs and your gaskets will leak oil/antifreeze/combustion/fuel mixture and result in a very poorly running engine and an extremely aggravated person after all this work and a horrific result there's also a torque tightening pattern you must follow in sequence so I won't give you specs I'm not sure of because no engine size was given get the book it's important for you to have it ok good luck Stephen
Posted on Jun 21, 2019
A google search pulls up the info https://www.google.com/search?q=ford+ranger+head+torque+settings&rlz=1C1CHBF_enUS813US819&tbm=isch&source=iu&ictx=1&fir=KkpIoYkvg5tpXM%253A%252CrAGrPil48V_eGM%252C_&vet=1&usg=AI4_-kRLelXlKa_LFzI9ndWi4HirgSbruA&sa=X&ved=2ahUKEwj3yZf6y_jiAhUQSK0KHdyNDIcQ9QEwAHoECAUQBA#imgrc=KkpIoYkvg5tpXM:
Posted on Jun 20, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1997 Ford Ranger
teeth dont line up . on the old clutch the teeth are pushed back. the new clutch the teeth are out more which causes problems lining up. is there a method to line up and/or push the teeth in more
Posted on Jan 04, 2009
Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): Foot pounds (Final torque) Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. Foot pounds (Final torque) Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
Posted on Feb 07, 2009
Okay...here is a list since no motor size:
All in ft lbs.......this is for the flywheel.
Posted on Apr 05, 2009
Torque is 85 ft/lbs of torque. Tighten the bolts starting in the center of the head and working your way out to the ends. Go very slowly and only tighten slightly each time you move from the center to the outside. You must pull the head down very slowly each time. Here is the sequence,
Posted on Sep 30, 2009
Testimonial: "Just what I needed, thanks."
Tips for a great answer:
Apr 05, 2017 | Ford Ranger Cars & Trucks
Dec 21, 2015 | 1998 Ford Windstar
Apr 28, 2015 | 2008 Ford Ranger 2.5
Nov 27, 2013 | 1992 Ford Ranger
Apr 30, 2011 | 1990 Ford F150
Dec 23, 2010 | 1992 Ford Ranger
May 31, 2010 | 1995 Ford F150 Styleside Regular Cab
May 17, 2009 | 1997 Ford Ranger SuperCab
50 people viewed this question
Usually answered in minutes!