Answer: the lock barrell on the drivers side will be broken causing the total open and close function to work.remove the lock barrell and you will see the paddle on the end of the barrell does not move in relation with the lock barrell itself.new barrell will sort you out ....
Is this something that we can do ourselves? We just got a quote for $400.
You'll need to remove your door panel (screws are by the door handle,
arm rest, under door and side of door) and pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.
I'm not sure what you mean by lock barrell.. I'm guessing the cylinder which you'll just have to bolt back onto the door.. you may need to find a specific bolt though....
If its central locking then you will have to remove the door panel to get to the cable ,the handle is removed without removing the door panel on older cars without central door locking .To remove the handle their is a screw on the door shut level with the handle ,once screw is removed you can pull handle outwards and then backwards to clear away from the door .Couldnt be simpler
394 views
Usually answered in minutes!
×