Hello: My DSC 9047 power series alarm keeps dropping signals (beeping stop & start beeping again) and with all windows and doors close its goes false alarm intermittently. Please help

Fridge keeps beeping or buzzing: The following is for Frigidaire models but others can be addressed similarly.

Several Frigidaire refrigerator models have an electronic control panel on the freezer door the owner can use to adjust the internal temperature, dispense ice and water and receive notification about issues such as the need to replace a water filter. The refrigerators also emit a beep for various actions and as an occasional alarm. Determining what causes the beeps necessitates some troubleshooting.
Temperature Controls ·A Frigidaire refrigerator's display panel blinks when the control panel is touched to set temperature controls. After pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, press the arrow buttons within five seconds to increase or decrease the desired temperature. If you do not press the arrow buttons within five seconds after pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, the refrigerator beeps to indicate the current setting will stay in place.

Door Open ·When you leave the refrigerator or freezer door open, the refrigerator beeps. Also, the "Door Ajar" indicator illuminates on the appliance's display panel. Shutting the door and pressing "Alarm Reset" stops the beeping and turns off the "Door Ajar" indicator light.
·The Frigidaire refrigerator has a control lock feature that prevents use of its control panel or dispensers when the unit is locked. When the control lock is active, a beep sounds when a keypad or dispenser is pressed. Release the control lock by pressing the "Control Lock" icon for three seconds. A beep will sound, and the icon's light will go out.
Power Reset ·A power reset is occasionally necessary if the Frigidaire refrigerator's control panel does not work normally or a reset function on the keypad does not work. A power reset involves disconnecting power to the refrigerator by unplugging its power cord from the electrical outlet, waiting 30 seconds and plugging the power cord back into the electrical outlet. When the control panel resets, a beep sounds. If the refrigerator beeps even after a power reset and the beeps' source is not known, contact Frigidaire.


Read more :http://www.ehow.com/info_12148688_cause-beeping-noise-frigidaire-refrigerator.
Cause of Beeping Noise in Frigidaire Refrigerator eHow

Kenmore freezer door alarm beeps but door is closed ...

www.shopyourway.com > Manage My Life > Questions

Every once in a while, the door ajar light goes on and the alarm beeps and will not ... Ifthe door is closed good and the door alarm is sounding, it will indicate the ...

How to fix constant refrigerator door alarm beeping? - Shop ...

www.shopyourway.com > Manage My Life > Questions

The doors aren't open and we have checked the air flow vents and made sure ... We have to turn the alarm off to get it to stop beeping but I more concerned about ... If the fresh food section lights are working, meaning you can get the lights to go ... Thefreezer fan motor would need to be checked to make sure there motor is ...

False Oil light alarm - The Chrysler Minivan Fan Club Forums

forum.chryslerminivan.net/showthread.php/5788-False-Oil-light-alarm

Jul 24, 2007 - 10 posts - ‎6 authors
I have an oil sending unit problem, getting false reads,oil light on when stopped ...Forum · The Minivan Mopar Garage · 3rd Generation Chrysler Minivans: 1996-2000; False Oil light alarm .... *1999 Plymouth Grand Voyager SE 3.3L-V6 FFV, 141K miles. ... Car does not have a Tach or oil pressure guage. Oil Light Keeps Coming On
10 posts
Jan 17, 2010
Oil pressure light comes on when brakes applied
10 posts
Dec 11, 2009
oil light flashing
10 posts
Mar 9, 2009
Intermittent Oil Light - Oil Pressure Sensor?
10 posts
Jan 14, 2009
More results from forum.chryslerminivan.net

i have a 98 plymouth grand voyager, when i slow down and

Try unlocking the door manually with the keys. If problem still happens. Your door or hood switch may be defective. They will send a false signal to the alarm that indicates one is open.

Sounds like the bonnet switch might be going out. You have an electrical contact switch that tells the alarm computer if the bonnet is open or closed. Either a miss adjusted or worn switch will send a false signal to the computer making it think it is open when it is not, you will also want to check the wiring that goes to the switch for signs of chaffing or kinks as the wire itself could get and send a false signal.

Temperature alarm
If the temperature becomes too warm, an alarm will sound and the temperature display will flash. The temperature the appliance is set at will determine when the alarm is triggered.
The alarm will sound and the display will flash under the following conditions:

• - whenevertoomuchwarmairflows into the appliance, for example when food is being loaded, re-arranged, or taken out.
• - wheneverlargeamountsoffoodare being frozen at once.
• - whenevertherehasbeenalengthy interruption of the power supply. Door alarm
  If the appliance door is left open for longer than approx. 60 seconds, the alarm signal will sound.

Switching the alarm system ON
The alarm system is always active. It does not need to be switched on manually.
Switching the alarm OFF early
Once the set temperature has been reached in the freezer section, the alarm signal stops and the temperature display stops blinking. If the alarm signal bothers you, it can be switched off early.
^ Press the alarm off button. The alarm signal will stop. The temperature display will continue to blink until the set temperature has been reached. The display then stops blinking, and shows a steady reading. At this point, the alarm system is ready again if needed.

If you had a model number (on a sticker inside the fridge), there's probably a manual online that tells how to adjust the door.

Chis power cycle system wait 60 seconds and try to see if points come back.Either your receiver is bad or your wireless points batteries are dead or somehow the wireless points got unlearned

I only received part of your problem. Could you please repost the problem along with your model number.
Thank you,Richard

It sounds like your alarm is getting triggered and causing the car to go into the 'immobilizer' condition. Look in the manual for a way to disable the alarm temporarily until you can get to a dealler.

Check this LINK. It states:
Often the 'false tripping' on the V70 is caused by frayed wiring to the tailgate. The rear screen heater and the two side screen wired grids are used as a 'break glass' detector on the 70 series alarm system. The three elements are wired in series.
If you go to the dealer or use the latest version of Vol-FCR the cause of the last alarm can be read from the VGLA unit, this will help diagnosis of the cause.

GL,
TD