How do i change the transmition fluid and wich

There is no trani oil filter on 92 honda accord

How to install transmission filter in a 1992 honda accord?

Consult your owners manual for the type of fuild to be used, don't recall if Honda bothered to put a drain plug on the transmission, most vehicle manufacturers do not! This will mean removal of the bottom pan from the tranny, of course prior to doing this purchase a replacment gasket and filter for the vehicle also have an adequeate quantity of fuild to prour back usually no more then 6 quarts is required, expect it to be less. Have a containor sufficient to hold that volume. Normally without a drain plug you would start loosening all the bolts holding the pan, only slightly, then select the corner that is simplest to reach and put your drian pan under it, this may require raising the vehicle off the ground and placing it on jack stands, unless you have access to a vehicle lift, loosen and/or remove the bolts in that corner till the fuilds drain into the holding pan, don't attempt this on a HOT vehicle, the fuild can be several hundred degrees and burns are possible. After you have drained the fuild, remove the pan, then remove the filter. Install a new filter and replace the gasket, some additional adhesive helps to make the new gasket stick to the pan, talk to the counter person where you buy the filter and gasket, they will recoomend something the can also tell you the quanity and type of fluid to use. If you lack the equipment to do all this then a local transmission shop will usualy have a fluid change special and they get dirty and dispose of the old fuild for you!
Good Luck