Question about Cars & Trucks

1 Answer

Tension pulley diagram for 2008 sienna le. making noise when cranks

Need pulley schematics

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Cars & Trucks Master
  • 1,187 Answers
Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 54 Answers

SOURCE: How do you replace wheel bearings on 2004 Toyota Sienna LE

Dont mes with that, Please take to agent to replace. Its your life if you didnt do it wright.

Posted on Jul 11, 2009

  • 484 Answers

SOURCE: 2006 Nissan frontier 4 cylinder belt diagram + tensioner pulley

They are under the hood or on the front crossmember.

Regards,
matt

Posted on Sep 14, 2009

moparownr
  • 667 Answers

SOURCE: 2002 Ford Escort ZX2 serpinten belt routing & tensioner pulley

go to www.gates.com on the lower right hand side under popular topics, click on timing belts, then on the left hand side click Parts Locator and Interchange, enter your cars info and the first page that comes up will show you a camera icon for a pic of how your belt is routed. The tensioner pulley is the one mounted on a silver arm, usually at the top. Hope this helps let me know.

Posted on Sep 22, 2009

  • 752 Answers

SOURCE: 2006 toyota sienna belt diagram

rPost serpentinebelt.jpg MenuController.getInstance().bindHandlers($('zoomedOutMenu'),{"zoomedOutMenu":{"on":"#F7F7F7","off":"#BDBDBD","link":"#000000","border":"#000000"},"btn_decorateimage_menu_out":{"on":"#E3E4E6","off":"#F7F7F7","link":"#000000","border":"#000000"},"btn_share":{"on":"#E3E4E6","off":"#F7F7F7","link":"#000000","border":"#000000"}}); FullViewMenuController.getInstance().bindHandlers($('zoomedOutMenu'),'out'); FullViewSearchController.getInstance().bindHandlers(); // Page Controller // to use in JQ context prototype objects // this method is used to reload menu when ajax fetch happens function reloadFullViewMenu(ratingConfig, baseTheme, subTheme, comments, taginfo, primaryMedia) { var zoomedIn = $('zoomedInMenu'); var zoomedOut = $('zoomedOutMenu'); // reset theme on zoomed in & out menus MenuController.getInstance().bindHandlers(zoomedIn,{"zoomedInMenu":baseTheme,"btn_decorateimage_menu_in":subTheme,"btn_share":subTheme}); MenuController.getInstance().bindHandlers(zoomedOut,{"zoomedOutMenu":baseTheme,"btn_decorateimage_menu_out":subTheme,"btn_share":subTheme}); // reset rating js ratingsController.initialize(); ratingsController.config(ratingConfig); // reset menu FullViewSearchController.getInstance().bindHandlers(); FullViewMenuController.getInstance().bindHandlers(zoomedIn, 'in'); FullViewMenuController.getInstance().bindHandlers(zoomedOut, 'out'); document.fire(PB.EVENT.PAGE_LOADED); commentsController = CommentsController.getInstance(); commentsController.mixIn({ mediaUrl: comments.mediaUrl, viewAlbumUrl: comments.viewerAlbumUrl, attachRedirectUrl: comments.attachRedirectUrl, commentRedirectUrl: comments.commentRedirectUrl }); var fsi = $('fullSizedImage'); var onFsi = function(event) { pageTags.addTagListToImg('fullSizedImage', taginfo, true); } onFsi(); // share icon refresh var menuShare = jq(document).find('#zoomedInMenu #btn_share .sharebutton'); if(menuShare.length > 0){ menuShare = jq(menuShare[0]).parent(); var shareAnchor = jq(document).find('#navigationContainer .shareContainer'); shareAnchor.html(menuShare.html()); } var updateProductPanel = function(obj, link){ obj.attr('href', link); var img = obj.find("img"); img.attr('src', primaryMedia.thumbURL); } // need to find product images module and replace it with new image and links var moduleContainer = jq(document).find('.moduleItem .module_products'); if(moduleContainer.length > 0){ var mug = moduleContainer.find('.mug a'); var tshirt = moduleContainer.find('.tshirt a'); var playcard = moduleContainer.find('.playcard a'); var gcard = moduleContainer.find('.gcard a'); var skinit = moduleContainer.find('.skinit a'); var print = moduleContainer.find('.print a'); updateProductPanel(mug, primaryMedia.albumURL + "?action=kodak&selectedMedia=" + primaryMedia.filename + "&productType=mugs"); updateProductPanel(tshirt, primaryMedia.albumURL + "?action=kodak&selectedMedia=" + primaryMedia.filename + "&productType=tshirts"); updateProductPanel(playcard, primaryMedia.albumURL + "?action=kodak&selectedMedia=" + primaryMedia.filename + "&productType=playing-cards"); updateProductPanel(gcard, primaryMedia.albumURL + "?action=kodak&selectedMedia=" + primaryMedia.filename + "&productType=cards"); updateProductPanel(skinit, "http://www.skinit.com/integration/external_photo_import.php?fullresurl=" + primaryMedia.mediaURL + "&source=photobucket&affiliate=photo_bucket&description=" + primaryMedia.title); updateProductPanel(print, primaryMedia.albumURL + "?action=kodak&selectedMedia=" + primaryMedia.filename + "&productType=prints"); } } good luck or go to Below is the image at: www.toyotanation.com/.../showthread.php?t=210042

Posted on Apr 24, 2010

  • 14 Answers

SOURCE: Noise from 2008 Sienna Engine

YES THERE IS A RECALL, ON VARIABLE VALVE TIMING OIL HOSE,
I BROUGHT MY 08 IN AND THEY REPLACED THE OIL LINE NO MORE NOISE....

Posted on Oct 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt diagram


Hi there I am technical mechanical and electronic engineer mechanic if you want help you I have to no more information like make and kind

Oct 25, 2015 | 1995 Plymouth Voyager

1 Answer

I think I need the belts adjusted as they are making a noise. How do I adjust them?


Locate the belt diagram sticker in your engine bay. It should look similar to the following:
10_31_2011_11_02_03_pm.jpg

After you have done that, look for a pulley labeled t or tensioner. Then use a fitting socket on the tensioner nut to tighten the belts. Be carefuly not to overtighten the belts because they will snap in cold weather. If they are squealing or making noise check to make sure the belt isn't overworn or if there is moisture on the belt.

Oct 31, 2011 | 2008 Toyota Corolla

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    Need a diagram for a 99 toyota corolla serpentine belt


    • Here is the serpentine diagram for a 1999 Toyota Corolla with and without AC.

    ironfist109_31.gif


    • Thank you for using FixYa

    Regards, Tony

    Jun 19, 2011 | Toyota Corolla Cars & Trucks

    2 Answers

    Diagram to show how to get the serpentine belt of a 2008 dodge caliber


    There is a diagram in the engine compartment itself that displays belt routing and removal.

    When you look at the engine and all the pulleys that the serpentine belt goes around, one of those pulleys will have a "tensioner" on it. On that "tensioner", there should be a square looking slot for you to insert a socket extension to or you may have enough room to just use the socket drive handle itself.

    Rotate counter clockwise until you have relieved enough tension to slide the belt off. Reverse the procedure for re-installation.

    Jun 03, 2011 | 2008 Dodge Caliber

    1 Answer

    I need a diagram to reinstall my 2008 grand caravan serpentine belt. The sticker on the rad is missing


    actually a diagram is not needed for a serpentine belt. It may look confusing at first, but remember that the flat side vs. the ribbed side goes to the respective pulleys that are flat or ribbed. That should make it easy to 'thread' the new belt on to the pulleys. Just put flat to flat and ribbed to ribbed until the last pulley, the tensioning pulley is encountered, which in many cases uses a breaker bar 1/2" square or a hex socket to 'release' tension and put the belt on easily with your fingers (don't let go of the breaker bar when you do this, of course).

    Good luck on this belt installation.

    Feb 05, 2011 | 2008 Dodge Grand Caravan

    2 Answers

    Rattle noise coming from belt


    this could be a bad pulley or alternator, you will need to remove the belt and spin the pulleys by hand to see which one is making noise, it could also be the ac compressor pulley, start there.

    Sep 04, 2010 | 2008 Chrysler Sebring

    2 Answers

    Change serpentine belt on 06 sienna


    1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
    2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
    3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
    4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
    5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
    6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
    7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
    8. 8 Remove the wrench and close the hood.
    Thank you and good luck,
    Lee

    Aug 26, 2010 | 2006 Toyota Sienna

    1 Answer

    My belt is worned out i need step by step on how to change it.


    GET LOND DRIVE 3/8 RACHET OR BELT TOOL AND PLACE ON THE BELT TENSIONER AND PUSH THE TENSIONER YOU WILL SEE BELT IS LOOSEN REMOVE THE BELT FROM THE ALTENATOR PULLEY AND LET THE TENSIONER GO SLOWY AND REMOVE THE COMPLETE BELT. COMPARE THE OLD BELT FOR SIZE AND MAKE SURE THEY ARE EXACT MATCH. YOU HAVE BELT SCHEMATIC TOP OF THE WATER PUMP START FROM THE BOTTOM CRANK PULLEY PLACE THE BELT AND MAKE SURE DONT MISS TEETH OUT OR INSIDE. A/C PULLEY WATER PUMP POWER STEERING IDLE PULLEY AND OTHER SIDE PLACE ON TENSIONER PULLEY TO AND PUSH THE TENSIONER AGAIN AND PLACE THE ALTENATOR PULLEY AND YOU ARE DONE. BEFORE START TO ENGINE FALLOW THE COMPLETE BELT FOR PERFECT SIT AND CORRECT POSITION.SHOULDNT BE TOO TIGHT OR TOO LOOSE.

    Dec 16, 2009 | 2000 Pontiac Grand Am GT

    2 Answers

    Need belt schematic for 2006 toyota corolla


    I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

    Nov 29, 2008 | 2006 Toyota Corolla

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    23 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    Marvin
    Marvin

    Level 3 Expert

    85020 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22484 Answers

    john h

    Level 3 Expert

    21326 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...