Question about Buick Cars & Trucks
Depends on what audio system you have . Base , upscale etc.... You need to look on the RPO code sticker , could be in the glove box , center console , trunk , driver door jam ? RPO - regular production order .
Radio AM/FM Stereo, Seek/Scan, Auto REV Music Search Cass, Auto Tone, Clock, ETR
Radio AM/FM Stereo, Seek/Scan, Clock, ETR
Radio AM/FM Stereo, Seek/Scan, Compact Disc, Auto Tone, Clock, ETR
Radio AM/FM Stereo, Seek/Scan, Auto Rev Music Search Cass, Clock, ETR
Radio AM/FM Stereo, Seek/Scan, Auto Rev Music Search Cass, CD, Auto Tone, Clock, ETR
Posted on Sep 26, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Ok this may be something smal that may be simple to fixs; your plugs are in the wrong cylinder?
Check Your gap size .060 (In thousandths of an inch)
Im not sure of the size of engine please look below for your make?
Fig. 3.8L VIN 1 Engine Firing order: 1-6-5-4-3-2 Distributorless ignition system
Fig. 3.8L VIN K Engine Firing order: 1-6-5-4-3-2 Distributorless ignition system
Fig. 3.8L (VIN 1 and L) Engines Firing order: 1-6-5-4-3-2 Distributorless ignition system
Fig. 3.8L (VIN K) Engine Firing order: 1-6-5-4-3-2 Distributorless ignition system
I hope that this help!
Posted on Jun 08, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
jack the car as high as you can, then remove the driver side suspension and tie the brake caliper out of the way, remove the coolines and connectors and linkage from top and sides of trans, put a transmission jack (u can rent these) under the pan of the trans and loosen the trans mounts, then jack the trans up and pull it out, this is a bugger of a job with a lift so good luck
Posted on Oct 15, 2009
Tips for a great answer:
Feb 04, 2017 | 2000 Buick LeSabre
Dec 25, 2013 | 2000 Buick LeSabre
Oct 22, 2013 | 2000 Buick LeSabre
Jan 27, 2011 | 2000 Buick LeSabre
Mar 17, 2010 | 2000 Buick LeSabre
Jan 30, 2010 | 2000 Buick LeSabre
Aug 22, 2009 | 2000 Buick LeSabre
Aug 06, 2009 | 2000 Buick LeSabre
85 people viewed this question
Usually answered in minutes!