2013 crankshaft sensor kia

Hi Alex. My name is Tim Dorton,I was a Nissan Senior Tech. I know the Senior Engineer at Kia (Paul Lawson) because he was Nissan's Senior Engineer. He likes to hide things in hard to get places. Anyhow here is a picture of where it is,hope this helps.http://www.kiopman.com/components_and_components_location-938.html

It is behind the timing belt cover

For Kia radio codes follow this link: Car radio codes in Uxbridge London Gumtree

This car have a Crankshaft and camshaft sensor the crankshaft sensor is loceted in near the pulley crankshaft and the camshaft sensor is located in the camshaft cover behind the radiator. good loock

It's listed on this drawing.

Hi LIsa:
On 2001-2005 vehicles the crankshaft sensor is mounted on the front of the transmission case adjacent to the flywheel.

On 2006 vehicles the crankshaft position sensor is located next to the radiator hose inlet and outlet assembly.

I really hope this helps, and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Have a nice day and thanks for using FixYa.

Jose.

I just replaced the crankshaft sensor back in November. It is a bit of work to access, but you will find it on the inner crankshaft sprocket. This is under the lower timing belt cover. It is just a black sensor that partially covers the sprocket. You will need to remove the serpentine belts and outer crankshaft sprocket to access it. At the time I needed to change it, I also happened to be changing the timing belts as well so if you need those done soon, this would be a good time to get them done.

The crankshaft position sensior is locarted at the crankshaft pulley behind the timing belt cover, see picture below.

the crank sensor should be located on the left rear of the engine nearest the bell housing. the exciter ring is bolted on the end of the crankshaft inside the crankcase. holp this helps. cheers

Located near the crankshaft pulley usually.