Question about 1992 Chevrolet S-10

3 Answers

1992 chevy s10 no brake lights or turn signals

1992 chevy s10 blows fuses when i hit the brakes or turn on left turn signal.

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

Check the front and rear (although probably the rear) turn signal bulb socket for corrosion and/or water intrusion. If you find corrosion attempt to clean (but you will probably have to replace the socket and bulb). For water intrusion you will probably have to replace the break lamp assembly.

Posted on Aug 02, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem, in my case the trailer brake cable behind the bumper had being chewed by a Dog and was shorted out.

hope this helps

Posted on Feb 12, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

I have about the same problem, mine started blowing the turn signal and back up light fuse about 3 weeks ago,
It seems to blow the fuse when I am driving, and also turn left.
I had a new switch put in the steering column, it hasn't helped.
The vehicle has an electric odometer, that was stuck for a few days at 99,999 it broke loose about 50 miles ago.
I wonder if the odometer isn't causing the problem, because the turn signal works indefinitely while S-10 is sitting still, engine running, but blows turning left while driving.

Posted on Oct 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my turn signal/ hazard light fuse keep blowing out


you have a short in one of the light sockets or a worn wire from the wiring harness. could be the flasher assembly. are the turn signals different bulbs from the brake lights? Does using the brakes blow the fuse? (Rear lights or brake light switch on brake pedal). left or right turn signal blowing the fuse will tell which side has the short. 4 ways only, replace the relay.

May 21, 2015 | 2004 Jeep Grand Cherokee

2 Answers

My left brake light/turn signal isn't working! I replaced the bulbs and turn signal flasher! Still not working! Its 2000 Chevy s10 blazer


If the other brake and turn lights are working the brake light and flasher units are ok . With a test light check at the bulb holder terminal and bulb holder body, test light should glow ,if not check from terminal to a metal part of panel away from the light body . If test light now glows the brake light body has a bad earth if the test still not glowing the power cable to the light is broken.

May 20, 2014 | Cars & Trucks

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Chevy 1992 s10 no brake lights


First put a hot wire with a fuse on it to the brake pedal switch then step on the brake and see if the lights come on, if they do then you will have to replace the steering wheel harness if all the fuses are good, also check that the trunsignals work, if they do and you have no brake lights then again it is the harness in the steering columb that is defective, they run about $25.00 and are not hard to replace. hope this helps if the turn signals work and the brakes don't it means the floating ground in the turn signal switch is bad.

Jul 06, 2010 | 2001 Chevrolet S-10

1 Answer

Chevy trailer brake problem


Check under hood fuse box make sure L. trailer light fuse isnt blown.

Aug 05, 2009 | 2005 Chevrolet Silverado

1 Answer

The brake light do not work and the fuse keeps popping


Check the wiring. Using a multimeter in ohms to see where its grounding out. If the wiring is not the problem check the turn signal switch. The turn signals and brake lights are wired together when you hit the brakes and use the left or right turn signal it should cancel out by using the turn signal switch. There is also a switch that the brake pedal touches when brakes are applied check the switch to make sure its not faulty. This can also be the problem. I had a early 90's model accord had the same problem.

Let me know if i was any help

May 19, 2009 | 1994 Jeep Grand Cherokee

1 Answer

I have a 1990 chevy s10,all my lights work except my brake lights


Do you have power with a test light in and out of the switch? Do the turn signals work? Will the brake lights work if you play with the turn signal handle?

May 06, 2009 | 1990 Chevrolet S 10 4WD

1 Answer

Blowing brake light fuses everytime you hit brakes.


Sounds like a short in the steering colume, maybe the turn signal switch, or a wire that the insulation got wore thru in the colume. Unhook break light switch and try the turn signals and hazards again and see what happens, maybe you can isolate it that way. Also if you havent done it already chk.the sockets in tailight housing for corrosion and bear wires, or anything, even ground wires.

Apr 10, 2009 | 1998 GMC Jimmy

1 Answer

No brake lights blows fuse every time


there is most likely a short in the wires have you put a tow package on it if so did you splice in to the lines check all wires and see if they are burnt any were most likely short

Jan 05, 2009 | 1995 GMC Jimmy

1 Answer

89 Honda Accord brake light and turn signal seem connected


Looks as though you have earthing problems.
I would make sure that the earthing is O.K on flasher and brake.
You would then find your symptom disappear.

Hope that sorts it.

Dec 05, 2008 | 1992 Honda Accord

Not finding what you are looking for?
1992 Chevrolet S-10 Logo

679 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...