Question about 2001 Lincoln LS

Open Question

2001 lincoln ls kickdown and throttle valve tv cable assembly

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
michigan man
  • 3533 Answers

SOURCE: pcv valve

AutoZone can help with diagrams

Posted on Jan 18, 2009

Ad
chrischronic
  • 235 Answers

SOURCE: 2002 LINCOLN LS V6 3.0 PCV VALVE LOCATION

it is down under the intake manifold. the intake manifold must be removed to get to it. this vehicle is known for developing a vacum leak in the elbow hose that connects to pcv valve, so ive done a few.

Posted on Feb 19, 2009

  • 1 Answer

SOURCE: cd player on 2001 lincoln ls - cd error when i press load button

My father inlaw just purchased a 2001 lincoln, with a six disc changer, Question is he loaded the unit ,and now he wants to eject the cd's and the changer won't open? any suggestions thanks

Posted on Jan 11, 2010

  • 5 Answers

SOURCE: How to change the fog light bulb on a lincoln ls

get under the car and the fog lamps will be on the corners of each side. all you do is twist the electrical connector to the right and it will come out to install one re connect the new bulb and line up the connector and turn to the left to lock it in place

Posted on Apr 03, 2010

SOURCE: where is fuse box located on 2001 lincoln ls...

You have fuses and relays-

Under the hood.pass side,front,next to washer bottle and ABS motor

On the right side kick panel,under glove box. Have to remove cover

In trunk,lift cover,left of battery.

Posted on May 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 lincoln ls and it shows p1299 code , but when you start it ,it shakes and makes a noise like the engine is tearing up . The p1299 code is for the dual coolant control valve. What could be...


PO 1299 --Cylinder Head Over Temperature Protection Active

You have 2 Fail Safes

1 for Temp
1 for ETC (electronic throttle control)

Check out the daul coolant valve, you seem to
be aware of, for some reason

The 2000 thru 2002 & later 03 to 06 LS are different,
as are the V6 & V8's in several design features

Jul 13, 2011 | 2001 Lincoln LS

Tip

Throttle Valve Cable Ajustment on a 2nd Gen Dodge Ram


<b> <p>Before you begin:<br /></b> <p>This tip is to show second generation Dodge Ram truck owners with the automatic transmission how to properly adjust the shift points of their transmission. These pictures are from my 1999 Ram 1500<br /> <p>with the 5.9 liter V-8 engine. When I bought my truck, I quickly decided I didn't like the factory set shift points. It shifted too soon under light and medium throttle...and passing gear/kickdown required a lot of gas pedal to achieve. My desire was to have the 1-2 shift and the 2-3 shift occur at a higher road speed/<br /> <p>engine rpm and to have a more sensitive kickdown. In my case, this was accomplished by adjusting the transmission throttle pressure cable only 1/4" (0.25 inches). What is the throttle pressure cable? Between the throttle linkage and the driver's side of the transmission there is a cable that causes a valve inside the transmission to move in relation to throttle position (gas pedal position). This cable is also referred to as the Throttle Valve (T.V.) cable.<br /> <p> <br /> <p>What does it do? The T.V. cable moves the throttle valve in the transmission.....which in turn controls THREE things: <br /> <p> <br /> <p>1) the transmission line pressure and <br /> <p>2) the transmission shift timing and<br /> <p>3) the transmission kickdown (or passing gear). Many people mistakenly believe it only performs function number three.<br /><b> <p> <br /> <p>Very important:<br /></b> <p> <br /> <p>l More throttle opening = HIGHER line pressure and LATER, FIRMER shifts.<br /> <p>l Less throttle opening = LOWER line pressure and EARLIER, SOFTER shifts.<br /> <p>l WOT (Wide Open Throttle) = MAXIMUM line pressure and FIRM shifts at the engine <b>redline</b>.<br /> <p> <br /> <br /> Even though this walkthrough is for 2nd gen Ram's, most cars and trucks with automatic transmissions will have similar T.V.C. setup and adjustment.<br /> <br /> <br /> This picture shows the location of the throttle pressure cable adjustment<br /> <p> <br /> <img src="kacomstock.png" /> <br /> <br /> Here's a close up of the bracket and adjustment mechanism<br /> <br /> <img src="kacomstock.jpg" /> <br /> <p>Here's what the locking clip actually looks like:<br /><b> <p> <br /> <p>When removing this clip, be aware that it is plastic and be careful that you don't break the tabs off when prying on them.<br /> <p> <br /> <p> <br /></b> <br /> <img src="kacomstock_0.png" /> <br /> <br /> Here is a close up of the T.V. cable and locking teeth.<br /> <br /> <br /> <img src="kacomstock_1.png" /> <br /> <br /> <p>For LATER, FIRMER shifts, slide the cable housing further OUT of (rearward) the locking mechanism. Attempting to make the shifts too late and firm will result in undesirably harsh shifts under light throttle.<br /> <p> <br /> <p>For EARLIER, SOFTER shifts, slide the cable housing further INTO (forward) the locking mechanism. Attempting to make the shifts too early will result in excessive transmission slippage during shifts, especially at medium and heavy throttle.<br /><b> <p> <br /> <p>WARNING: Going too far in either direction will cause trouble!!<br /> <p> <br /> <p> <br /> <p> <br /> </b><img src="kacomstock_2.png" /> <br /> <p>BEFORE you begin, make note of the cable position so you have that as the stock reference point.<br /><b> <p> <br /> <p>Make your adjustments in small increments of about 1/8" (0.125")<br /></b> <p> <br /> <p>At a fixed throttle position...say 1/4 throttle....every 1/8" of cable adjustment will change the shift points by a few miles per hour. At a greater throttle opening...say 3/4 throttle... that same 1/8" of cable adjustment will make more of a difference.<br /> <p> <br /> <p>When you're finished adjusting, replace the locking clip and road test it. Pay close attention to the light and medium throttle shift firmness and timing.<br />

on Apr 02, 2011 | Dodge Ram Cars & Trucks

1 Answer

2001 Lincoln ls v6 throttle body hose diagram after throttle body


V6 or V8

I have a 2004 V8 & all the manuals for 04

No one will provide you what you need
& very few people but me, even answer
LS questions

Only made for 7 years & too high tech

What issues do you have?

Jun 12, 2011 | 2001 Lincoln LS

1 Answer

Fuel fiter location


2001 Lincoln LS 3.0L SFI DOHC 6cyl the Fuel Filter is located: Beside the left front wheel and tire assembly.mounted on frame.

2001 Lincoln LS 3.9L SFI DOHC 8cyl the Fuel Filter is located: Beside the left front wheel and tire assembly.mounted on frame.

Hope this helps (remember to rate this asnwer).

Dec 02, 2010 | 2001 Lincoln LS

2 Answers

Cable on top of engine broke on throttle what does it do


Replace the cable with one from your local auto parts store or dealer.
It may be for cruise control if your cruise control no longer works.
Or, it may be for the accelerator pedal.

Nov 08, 2010 | 2001 Ford Explorer Sport

1 Answer

Changing spark plugs 2001 Kia sportage


These are really quite easy to do just time consuming. 1. remove the air ducting from the air box and throttle body 2. remove the accelerator cable and kickdown cable(if equiped with auto trans) from the throttle body 3. remove the 4 bolts from the throttle body and be careful to not ruin the gasket upon removal 4. remove the black cover from the rocker cover(valve cover) 5. remove the 2 coli packs and the spark plug wires. 6. remove the 4 spark plugs. Use NGK or Nippon Denso plugs and gapped at .032". Let me know if you need anything else.

May 16, 2010 | 2001 Kia Sportage

2 Answers

What is the function of the idle speed control valve?


The idle air control (IAC) valve assembly on a combustible engine monitors and manipulates the amount of controlled air moving around the throttle plate. The IAC valve is managed by the electronic control module (ECM) of the engine, which calculates the position of the IAC valve. Voltage pulses called counts extend and retract an internal conical-tipped shaft called a pintle inside the IAC valve. When the pintle is extended, the cone-shaped tip positions itself closer to the air inlet and restricts the amount of air allowed to pass through the throttle, building up more air around the throttle plate to increase the rpms of the engine. When the pintle is retracted, it moves away from the inlet and allows more air into the throttle away from the throttle plate, decreasing the rpms. The IAC valve operates and adjusts constantly while the engine is running to help prevent the engine from stalling or surging. This will not cause the engine to misfire!! Hopefully this helps

Aug 21, 2009 | 2002 Lincoln LS

2 Answers

Location of low side A/C port on 2001 Lincoln LS V8


2002 is what I have. should be similar

Service Gauge Port Valves
The high-pressure service gauge port valve is located on the A/C receiver drier manifold and tube assembly.
The low pressure service gauge port valve is located on the manifold of the A/C compressor manifold and tube assembly at the A/C compressor.

23d30e7.gif Item Part Number Description 1 19860 A/C evaporator core 2 19849 Thermostatic expansion valve 3 19A834 Manifold and tube assembly—thermostatic expansion valve 4 19D850 Manifold and tube assembly—A/C compressor 5 19E762 A/C charge port valve (low side) 6 19E762 A/C pressure relief valve 7 19703 A/C compressor 8 19D594 A/C pressure transducer 9 19712 A/C condenser core 10 19D701 A/C charge port valve (high side) 11 19N585 Manifold and tube assembly—receiver drier 12 19959 Receiver drier 13 19C734 Sensor—evaporator air discharge temperature

Jun 11, 2009 | 2001 Lincoln LS

1 Answer

Lincoln ls cruise doesn't work but the


Does this have a throttle cable, if so make sure the cruise cable is attached to the throttle beside the throttle cable. Sometimes the little plastic clip that holds the cable on breaks. Check that first.

Mar 02, 2009 | 2001 Lincoln LS

2 Answers

GAS PEDAL NOT WORKING/2001 LINCOLN LS


inspect throttle linkage, it may be disconnected or broken

Feb 27, 2009 | 2001 Lincoln LS

Not finding what you are looking for?
2001 Lincoln LS Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

gerry bissi

Level 3 Expert

4387 Answers

fordexpert

Level 3 Expert

5692 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...