Question about 2004 Mitsubishi Endeavor

1 Answer

To Change 2004 Mitsubishi Endeavor Transmission filter

I need to know the step to change the Transmission Filter. I know where it is. It's on the front side on the bottom And it has a Black cover. Their are afew bolts on it. Once that cover comes off is the filter in their. And is it bolted in. Do i need a Gasket to put back on.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 631 Answers

Yes you will need a gasket and if you go to the parts store they will sell you what you need. Just tell them what you have and they will give you the filter and gasket. I am not real sure on this year if there is a bolt holding the filter in place and I have looked in all my books on this one but can't seem to find out. If there is a bolt there will only be one more then likely but i really dont think you have a bolt. Just take the pan down and see if you can gently pull down the filter. Most of the time they are just up there with a O-Ring to hold them in.

Posted on Aug 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

What do I need done to my 2010 mitsubishi endeavor it is at 109,000 miles.


replace the timing belt , crank and cam shaft seal , hydraulic belt adjuster and idler pulleys ( 100,000 km limit)
rest of the service as per the service manual
if automatic . change the auto oil and if CV Transmission check with the dealer as the transmission oil to use as it is different to automatic oil

Nov 12, 2017 | Mitsubishi Cars & Trucks

1 Answer

How to change cabin filter 2011 Lacrosse


I just changed mine yesterday and these tips listed above were unfortunately incorrect.

Step 1 - Open the passenger door
There is a panel that has no screws on the flatside of the dashboard which faces against the closed door at the jam side. Use a body tool and pry the panel carefully exposing the inside area of the glovebox. If possible dont do this in cold weather because the tabs are plastic. Inside the panel you will see one small tab that the glove box has a 1/4 plastic clip seated in the tab.

Step 2 - Open the glove box. Remove the 3 hex screws on the top interior row of the glove box.

Step 3 - At the right and left corners of the bottom of the glove box remove the two front facing screws on the lower hinge.

Step 4- At the very bottom parallel to the floor there are two more hex screws remove those (they hold the plastic vent in place underneath the glove box. Pull the vent downward to release the tabs.
IMPORTANT: Dont forget to go back to step 1 and pull the small tab from the slot in the dashboard cover area ( Inside the panel you will see one small tab that the glove box has a 1/4 plastic clip seated in the tab)

Step 5 - Pull down on the glove box to release the clips.

Step 6 - You will see a black box inside. There are three tabs (right, top, and left) pull them individually to remove the front facing cover. Inside you will see the air filter. Remove and have airflow arrow pointed downward.

Reverse steps to reinstall. Be sure to line up the clips before pressing them back in place. Do not force them!

Good luck. I hope this helps. I did mine on the first attempt with no issues in about 10 minutes (I'm not a mechanic).

Aug 26, 2012 | Buick LaCrosse Cars & Trucks

1 Answer

How do i change the transmission fluid and filter in a 2004 awd mitsubishi endeavor myself


I am not familiar with that modle, but generally i would raise the car and support it securly.
Then if there wasn't a drain plug, i would remove the pan from the transmission ,following instructions from a good service manual.
hope this helps

Dec 21, 2011 | 2004 Mitsubishi Endeavor

1 Answer

I have a 2004 Mitsubishi Endeavor xls, It seems to be bogging down when I step on the gas to pass someone rather then speed up... Can anyone please help me ?? thanks


Sounds like your fuel filter is giving you early warning that its time to replace. The big question- when was last healthy tune up? All filters, plugs etc...

Feb 14, 2011 | 2004 Mitsubishi Endeavor

1 Answer

How do I change the cabin air filter?


In the engine compartment, look for a horizontal cover plate in the very front of the black plastic 'cowl', on the passenger side of the vehicle. It's roughly in front of the passenger side wiper blade.

The cover is approximately 2" x 10", and latches on the right-side, remove that cover and the filter is just lifted out

Jan 26, 2011 | 2005 Mercury Monterey

1 Answer

Heater/defrost does not change position. windows fog, fan motor running as should just will not let air into cabin.


get the cabin air filter of ur endeavor changed by following method.
Procedure to Remove the Old Cabin Filter First off, you need to open the glove compartment; you'll see two screws on top of the glove compartment and two at the bottom of it.

Remove each one of them one by one with the help of a Phillips screwdriver, and then unhook the stop bar which you can find on the right side of the glove compartment .

Next, pull the glove compartment out - while pulling the glove compartment out we disconnect the light wire .

Now, you should be able to see two tabs on both sides of the cabin filter which we press towards the middle of the compartment and then we remove the cabin filter cover . After this, slide the filter out of the housing .

Putting the New Filter In Place Now, you can easily insert the new filter in the filter housing making sure the "up" arrow printed on the filter points towards the roof of the Endeavor and then we replace the cabin filter cover.

Next, insert the glove compartment back into the dash and while it is half way through you need to reconnect the light wire.

Finally, reconnect the stop bar over the hook and finally replace the four screws to hold the glove compartment firmly in place. And, that's it - you've just learned how to change cabin filter in Mitsubishi Endeavor.

Dec 15, 2010 | 2004 Mitsubishi Endeavor

1 Answer

How change automatic transmission filter


You will need to remove the Transmission pan to get to the filter. Here is a step by step guide on replacing the trans filter

Oct 14, 2010 | 2004 Mitsubishi Outlander

2 Answers

Where is the oil pan drain plug on a 2005 sunfire


A 2003-05 Sunfire most likely has the Ecotec 2.2 motor. The filter is a cartridge element type which is located on the forward side of the engine on the drivers side; (below and slightly left of the power steering reservoir).

The oil filter is located under (inside) a black cover about 3-4 inches around and has a large hex head nut molded on top of it, to fit a socket on it. When replacing the oil filter element, press the tipped O-ring side of the filter down into the filter cavity until it locks in place. Then place the cover on top and tighten it.

The cover will automatically lock onto the top section of the oil element as it is being tightened. The drain plug is pretty standard and on the oil pan. However, most people are accustomed to a metal oil pan, and when viewing the Ecotec motor they confuse the metal TRANSMISSION pan as the motor oil pan.

The motor oil pan is actually aluminum, and looks like a continuation of the upper motor. For that reason, you don't "see" an oil pan. Knowing this fact, the oil drain plug is now easy to locate. Look at the far passenger side of the metal transmission oil pan. Now look at the very front of that section of the transmission oil pan and follow that ''line of sight'' until you reach the bottom of the aluminum motor (''oil pan''). The oil drain plug is right there, with it's head facing towards the transmission oil pan.

The drain plug (on a 2005 Sunfire) requires a 15mm wrench/socket; and has a built in rubber seal, which should be lubricated with oil before tightening.

Sep 18, 2010 | 2005 Pontiac Sunfire

1 Answer

How do i change the cabin air filter in my 2003 ford expidition


Locate the cabin air filter container on your Ford Expedition. If you are standing in front of the vehicle, looking at the engine, it will be on the back, left side of the engine, next to the heater fan. You will see a black cover over the top of the container. The air filter is approximately 6" x 9" and about 2" deep. Look for a black casing that will be about 10" across and 8" high. The box sits vertically against the firewall of the vehicle.
Step 2
Remove the cover of the cabin air filter by lightly prying on it with a screwdriver. The cover is secured with plastic tabs that pop off quite often. If this happens, you can buy replacements at your local automotive store.
Step 3
Remove the cabin air filter, and vacuum out the container to remove any dust or debris. Wipe it down with a clean damp cloth and let the inside of the container dry before inserting new filter.
Step 4
Place new cabin air filter in container and secure the cover, replacing tabs if needed. Remove tools from engine compartment and close hood.
Step 5
You are now able to enjoy driving with clean air flowing through the inside of your car.

May 25, 2010 | 2003 Ford Expedition

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

Related Topics:

1,566 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...