Question about 2004 Dodge Ram 1500
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Remove two bolts holding caliper on and pull up as hard as you can on the caliper. Wiggling back and forth at the same time helps.
Posted on Aug 02, 2008
Open up the tail gate, you will see two torque screws on the inside beside the tail lights. take these out, this will free up the housing and you can change it from there.
Posted on Feb 01, 2009
very easy take the mirror inside cap off if you can not get to the 3 bolts then you will have to take trim panel off to take trim panel off look for plastic caps take them out and unscrew them then pop out the bottom of the door and pop the sides out then lift up and out should be loose enough for the bolts now/ 10mm bolts 3 Please rate my response thank you very much
Posted on Feb 02, 2009
U NEED TO CHECK THE FUEL PUMP AND AURO SHUT DOWN RELAY.THEY ARE IN THE UNDERHOOD FUES & RELAY CENTER.U CAN SWITCH THEM 1 AT A TIME WITH A/C RELAY.IF THAT DOES NOT WORK U MAY HAVE A PROBLEM WITH THE PCM
Posted on May 13, 2009
Tips for a great answer:
Feb 03, 2016 | Dodge Cars & Trucks
Apr 21, 2014 | 2004 Dodge Ram 1500
Aug 03, 2013 | 2004 Dodge Ram 1500
Feb 01, 2013 | Dodge Ram 1500 Cars & Trucks
Jan 27, 2011 | 2004 Dodge Ram 1500
Jul 19, 2009 | 2004 Dodge Ram 1500
94 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: