Question about 1996 Chevrolet Camaro

Open Question

Water pump on 1996 camaro - 1996 Chevrolet Camaro

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: Replaced radiator, water pump, thermostat,

just wondering does that have a clutch fan on it? if so does the fan spin after the car is hot.

Posted on Aug 02, 2010

  • 743 Answers

SOURCE: i am wondering how difficult

Aside from the space you have to work in it is not hard at all. Some bolts and hoses and an electrical connection. The accessory brackets stay because the pump is right between them. Unlike the early days before serpentine belt system where the brackets would attach to the pump as well.
But while you're in there, since the LT1 has the distributer behind the pump, you might consider repacing the cap, rotor and wires.

Posted on Aug 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 96 v6 camaro rs watet is leaking from the water pump are water pump area


there is a weep hole bottom of water pump at the pulley area if it is coming from there it needs to be changed

Dec 05, 2014 | 1996 Chevrolet Camaro

1 Answer

How to change on a water pump on a 98 vw beatle 2.0


The water pump is run by the timing belt on that vehicle so you would need to research timing belt replacement for the 2.0l engine.

Nov 20, 2013 | 1996 Chevrolet Camaro

1 Answer

Water leak some where above water pump cant see if its a hose!


either hose or water might be coming from water pump peep hole when water comes out need to change waterpump or thermastate gasket

May 13, 2012 | 1996 Chevrolet Camaro

1 Answer

I am wondering how difficult it may be to replace the water pump in a 1996 chevy camaro z28 ??


Aside from the space you have to work in it is not hard at all. Some bolts and hoses and an electrical connection. The accessory brackets stay because the pump is right between them. Unlike the early days before serpentine belt system where the brackets would attach to the pump as well.
But while you're in there, since the LT1 has the distributer behind the pump, you might consider repacing the cap, rotor and wires.

Aug 16, 2011 | 1996 Chevrolet Camaro

1 Answer

R&r 5.7 distripter in 1996 camaro


Replacing the Optispark Distributor is a real pain in this year and the LT1 engine.
Here are the steps
Remove accessory drive belt
Remove air intake hose to engine
Remove Radiator fans (unplug wiring harness first)
Drain the cooling system
Remove water pump (unplug water temp sensor first, tie hoses back out the way)
Remove Crankshaft balancer (you can get around the hub).
Remove Optispark cap and the rotor, the remove the bolts that hold the distributor to the block

Reverse to assemble.

Jul 21, 2011 | 1996 Chevrolet Camaro

1 Answer

I have a 1996 camaro lt1 the waterpump leaks a steady stream out the bottom of the waterpump when it is running and it misses and sputters real bad and I was told the waterpump drives off the cam not a...


Water is getting on your distributer cap..It is located directly under the water pump and getting wet..It comes as a kit (distributer cap,rotary button) and is around $120-$160.. Water pump has to come off to get to it and need to replace it as well when its off or you will just get the new one wet.

Aug 09, 2010 | 1996 Chevrolet Camaro

1 Answer

Where is the ignition module located at on the '96 Camaro


if you are facing the engine find the water pump and just to the right of that you will see your coil and igntion module and the coil has a wire with a boot on it just like a spark plug and the other end is pluged in BEHIND the water pump to the distributor

Oct 15, 2009 | 1996 Chevrolet Camaro

2 Answers

1996 camaro stalls at low rpm. when I try to


Start out by checking for vacuum leaks.

Jun 09, 2009 | 1996 Chevrolet Camaro

1 Answer

Fuel pump


A fuel pressure gauge is the most accurate way. You can turn the key on and listen for a humming sound, that tells you the pump is running, but dosn't mean it's completely functional.

Sep 13, 2008 | 1996 Chevrolet Camaro

Not finding what you are looking for?
1996 Chevrolet Camaro Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...