HONDA ACCORD 1996 KEY IMMOBILSER PROBLEM
: I LOCKED MY KEY IN THE TRUNK AND I WENT FOR THE SPARE KEYS, I INSERTED THE RED AND THE KEY SECURITY LIGHTS JUST KEPT BLINKING RAPIDLY BUT WONT START. I PUT THE OTHER ONE AND IT STARTED FINE. BUT THE PROBLEM IS , IT NO LONGER RECOGNISE THE OLD KEY, ONLY THEHONDA ACCORD 1996 KEY IMMOBILSER PROBLEM: I LOCKED MY KEY IN THE TRUNK AND I WENT FOR THE SPARE KEYS, I INSERTED THE RED AND THE KEY SECURITY LIGHTS JUST KEPT BLINKING RAPIDLY BUT WONT START. I PUT THE OTHER ONE AND IT STARTED FINE. BUT THE PROBLEM IS , IT NO LONGER RECOGNISE THE OLD KEY, ONLY THE SPARE ONE. IF I SHOULD LOSE THIS ONE, IT MEANS THAT THE SPARE WILL NO LONGER WORK. WHAT DO I DO? HOW DO I MAKE IT RECOGNISE THE KEY I HAVE BEEN USING OR DO I JUST FORGET ABOUT IT AND ONLY USE THE SPARE ONLY?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If release lever is not functional, use key. If key will not turn in cylinder, spray WD-40 into cylinder and use sawing motion to get key inserted and continue sawing motion to free up lock wafers internal to cylinder so it will turn with key. If this process is not effective, you will need to remove rear seat to access paneling to trunk lock and open accordinly
www.fixya.com/cars/t23058317-reset_immobiliser Jan 22, 2014 - reset immobiliser I HAVE A HONDA CIVIC 1.6 LUXLINE 1998. I NEED TO BYPASS THE IMMOBILSER TO START THE CAR WITHOUT IT ... Press any button on remote one time within 20 seconds. .... How can i fix my honda 160i luxline92 model starting difficulty? Jul 20 ... Jun 09, 2012 ' 1996 Honda Civic.
Programming When Key added or replaced. System malfunction. How Obtain all keys. A maximum of 3 keys can be programmed. Close all doors and boot/tailgate. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press key lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press key lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press key lock or unlock button. Within 10 seconds: Press lock or unlock button of first key. System should now lock or unlock vehicle. Press lock or unlock button of second key. System should now lock or unlock vehicle. Press lock or unlock button of third key. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed keys. NOTE: If less than 3 keys are to be programmed, remove ignition key after programming last key.
Is this a security feature that comes with the alarm? because i only that certain cars above 00 can do this. but what might have happened, the old one got damaged some how, and even if its little, it could be enough to not let the key turn in the ignition, or any where in the car. i suggest taking the good key, and making a spare. if it was the alarm, like an alarm feature, you can probably take it to where it was programed, and getting the key reprogrammed. Or you can also just disconnect the battery for like a couple of minutes, and reconnect it so the alarm or security feature will reset. hope this helps, goodluck.