SOURCE: 2001 mazda protege will not start
well, with all that you have changed the only two possible things that are left PCM and the ECM....
Do you have an alarm system on this vehicle? If you purchased this car second hand it may have something that is inhibiting the engine from firing. From what you have told us here that would be where I would start looking.
I really hope this is helpfull
SOURCE: 2001 mazda protege keeps stalling
my 2001 mazda protege starts hard, idles low and high at various times (never normal) and it acts as though its going to stall at all times. sparks and wires are changed no help, changed air filter no help. any idea on what to do?
SOURCE: need timing marks on dual cams for 2001 mazda
Click on the following direct Link. It has the Tining Belt Diagrams that will match your specific engine. Included are instructions and directions.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2001/make/mazda/model/protege/2001_mazda_protege_timing_belt_diagram_marks.htm
SOURCE: 01 mazda protege camshaft torque specs
CAMSHAFT BEARING CAPS TORQUE TO 125 INCH POUNDS. CAMSHAFT SPROCKETS - 44 FT LBS. YOU NEED A REPAIR MANUAL LIKE A CHILTON WITH CAMSHAFT TORQUE SEQUENCE DIAGRAM. YOU HAVE 20 CAMSHAFT CAP BOLTS THAT HAVE TO BE TORQUE IN SEQUENCE.
Testimonial: "Thanks that was very quick and right on he money "
SOURCE: I need the 2003 Mazda
Fig. Loosen the remaining camshaft cap bolts using this sequence-2.3L (KJ) engine
Fig. Tighten the camshaft cap bolts using this sequence-2.3L (KJ) engine
531 views
Usually answered in minutes!
×