Question about 2003 Kia Rio

1 Answer

How do I relace the drivers side head light? - 2003 Kia Rio

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 23 Answers

If you can see the locking ring for the lamp . push on it while turning left pull out old lamp replace with new while not touching the glass of the lamp.you may also have to remove some type of cover sealing the light from the engine compartment and or move the battery.

Posted on Aug 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing battery cables on 1990 300zx


I have a 1996 300ZX Fairlady Left hand drive. I tried replacing the battery. Now the head light flash and wont start. WHY? must I reset? and Where?

Mar 17, 2013 | 1990 Nissan 300ZX

1 Answer

Cannot figure out how to relace freeze plugs in 1998 cirrus


It depends on which freeze plugs you are replacing. The ones on the left side of the engine block, the ones on the right side of the engine block, the ones on the front of the engineblock, the ones on the back of the engine block, the ones on the front of the cylinder heads, the ones on the rear of the cylinder heads???

Jan 09, 2011 | 1998 Chrysler Cirrus

1 Answer

How to change the low beam bulb on a 2005 buick rendevous?


Hi: Open Your Hood ,And From The Inside of Your Engine Compartment Look For a Wires Running To Both Left And Right Front Lights Theres a Bulb Socket attached to Your Head Lights ,Theres not a Lot of Room to work With ,But Reach in With Your Hand And Use Your Fingers To Turn the Elecrical Head Light Socket Counter Clockwise until the Bulb Socket Stops Then Pull Out The Bulb Socket ,Pull Old Bulb Or Bulbs Out .To Relace With New. These are Halogen Bulbs, Be Careful And Try Not Touching the Bulbs with Your Bare Fingers. You can Put a Real Thin Gloves On to Push Bulbs Back Into The Sockets.This Should Get You You could have 2 Bulbs Per Side 1 Low 1-High . Hope This Helps You, Let Me Know by Voting on my Quality of Assistance.

From the WYOCWBOY

Jun 01, 2010 | 2005 Buick Rendezvous

1 Answer

2001 Dodge Intepid relaced timing system & heads, only two cyliders are injecting fuel, seems different cylinders every starting attempt


check the timing slots on your left(driver's)side camshaft timing sprocket..compare new sprocket slots to old gear..i bet you have a newer gear on engine now..different timing slot arrangement..your controller will not recognize these slots..they changed in 2002 model year to a different engine controller..you will need sprocket for your model year vehicle..i hope this helps

Mar 01, 2010 | Dodge Intrepid Cars & Trucks

2 Answers

Fan relay relacement proceedure for 2002 Jeep Cherokee


It is located in a very unusual place. Remove your Right headlight. underneath whaere the light usually is, you need to cut and opening about 3x3 inches. There is your relay. For more pictures do a google search.

Feb 02, 2010 | 2002 Jeep Grand Cherokee

1 Answer

F 150 Head light issue


You know the fuse for the high beams is good ( Cab fuse panel fuse # 16 ) and the pass low beam fuse ( cab fuse panel # 26 ).
Might want to check cab fuse panel fuse #28 ( this is the driver's side low beam ).

If this fuse has power on both sides ( with the low beams on ) next you can pull the headlamps, and check for power at the connectors, but depending when the last bulb change took place, I would say you need need bulbs. ( need at least 1 for the high beam out )
Confirming with a meter at the headlamp would be a good idea, before spending the money.

The bulb connector has 3 pins.
Black wire is ground on both sides
Light Green w/ Black stripe wire is high beams on both sides
Driver Lo = Dark Blue w/ white stripe
Pass Lo = Dark Green w/ Orange stripe.


Nov 16, 2009 | 2002 Ford F150 Regular Cab

1 Answer

2004 chevy trailblazer low beams not working fuses good bulbs new


Check the relay or your head light switch has gone bad. 

Apr 06, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

Head light-Drivers side


Well it was the weird electrical situation but I got it fixed. For my premium service please email back and I will give you what fixed this non common problem.

Jan 26, 2009 | 2001 Dodge Caravan

Not finding what you are looking for?
2003 Kia Rio Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...