Question about Dodge Durango

1 Answer

My low beams just quit ,both at the same time..(01) durango

I still have high beams. i just replaced combination switch due to my wipers coming on by themselves and i still have the low beam issue. any advice would be greatly appreciated.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Check for a bad fuse for the low beams on the headlights.

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the multifunction lever switch located on the 1999 Dodge Durango. this switch controls turn signals and flasher system.


In the steering column. The lever you move to activate your turn signals, high/low beam headlights, wipers and washers is part of the multifunction switch.

Dec 30, 2016 | Cars & Trucks

2 Answers

Headlights dont work


look at the fuse or a broken wire/s

Aug 23, 2014 | 1997 Dodge Dakota

1 Answer

No low beams


bad light switch replace

Nov 17, 2013 | 2000 Dodge Durango

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

Kia Sedona Both Headlights are NOT working


Replace the switch. The low beam side of the switch isn't making a connection.

Sep 12, 2012 | Kia Sedona Cars & Trucks

1 Answer

Light switch ( signal cruise and wiper also)


its the light switch (combination switch) needs to be replaced

Jun 18, 2012 | Cars & Trucks

1 Answer

Low beams quit, high beams ok.


You have a separate fuse for the high beams and the low beams. Fuses are located in panel in driver's side of dash concealed when door is closed, or in the power distribution box under the hood on the driver's side. You have separate lamps for each (not likely since they both went out together).
The worst thing it could be, and it is very expensive for parts/labor (and you don't want to tackle this one yourself unless you are a good mechanic) is the column-mounted dimmer/cruise/wiper/washer/turn signal switch. The part alone is almost 200 bucks, and installing it requires dismantling the steering column inside the SUV.
Hope it's not that.

Feb 22, 2010 | 2003 Chevrolet TrailBlazer

3 Answers

Headlights


disconnect the module that is mounted in front of the fuse box .Then carefully clean the the connectors ,they are usually pretty dirty.After they are clean put it back 2gether.If it doesnt solve the prob then u might have to stick some washers on your bottom screws so that your module is angled in.This will ensure a solid connection.

Oct 19, 2009 | 2001 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...