Cars & Trucks Logo

Related Topics:

J
Jeffrey C MEYER Posted on Jul 16, 2018

4218 has spark and fuel, but won't start??? - Cars & Trucks

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 nissen altima won,t start turn over but won.t start

Check to see if you have fuel to the rail, if not you have to reset your fuelpump safety switch or a bad fuel pump.

If you have fuel, check your spark.
No spark check your timing belt.

1helpful
1answer

My Lincoln navigator won't start will turn over but won't start

you either have no spark , check spark plugs, or fuel pump isnt working , dont know the year of your lincoln but it could possibly be a fuse for your fuel pump ..
0helpful
1answer

I have a 94 chrysler concorde. The problem is it won't start, I have replaced the fuel pump and the fuel pump relay fuse. And it still won't start. What should I do now?

check see if you getting spark if not.have vechicle code scan could have faulty ECM .faulty camshaft sensor and crankshaft sensor.make sure engine has been tuned up.replace fuel filter change spark plugs and wires. before engine can run need fuel and spark.either one not working car will not crank.
0helpful
1answer

97 gmc jimmy cranks but won't start, have replaced everything possible but still won't start, most of the time the brake lights won't work, or the gauges goes crazy. I have changed relays,...

There are two basic reasons for not starting - no spark or no fuel, both of which are controlled by the ECM. You need to check error codes and these items - for the spark, test it at the cylinder 1 sparkplug; for the fuel check the pressure (if too high or low, problem!).
0helpful
1answer

2003 kia Sedona won't. start

If this is a sudden occurrence and nothing suspicious happened prior, you most likely lost either gas or spark to the engine. You need to check for both.

Do you hear the fuel pump in the gas tank buzz on for a couple of seconds when you turn the ignition key to ON? Unless the fuel pump turns on and puts gas under high pressure at the fuel injectors, the engine cylinders won't get gas to start. Correct fuel pressure is crucial to know if you have a fuel pump (or fuel filter) problem. If the pressure is correct, it is probably not a fuel problem but a spark problem, although there are less common instances where a fuel injector circuit may malfunction.

The ignition system not producing spark at the spark plugs is the other common problem of no starts. Buy a cheap spark tester at a parts store, plug it into one of your spark plug wires, then crank the engine over and watch for a strong blue spark. You might need a helper to do this. If you see a consistent spark, the ignition system is probably good, although you should probably check more than just one plug wire-sometimes one bad ignition coil in a coil pack will cause no starting. Good luck.
0helpful
1answer

1997 mazda 626 won't start.

Are the plugs wet with fuel?
Check for spark. No spark? it may be the ignition module.

Plugs dry and spark present? No fuel?Spray a little starting fluid and see if it will run on that.
Then check pump fuses and for fuel pump noise.
0helpful
1answer

Turns over won't start getting gas up top to fuel injectors, but won't start

GIVE IT A SHOT OF STARTING FLUID IN INTAKE IF IT RUNS FOR A MINUTE THE CONTROLER FOR INJECTIORS HAS PROBLEMS IF NOT CHECK FOR SPARK AT SPARK PLUGS THIS WILL TELL YOU REALLY WHAT SYSTEM YOUR HAVEING PROBLEMS WITH. USALLY IF THERES FUEL AT INJECTORS ITS A SPARK PROBLEM GOOD LUCK
0helpful
1answer

Won't start sometime

you need to determine if its a no spark or no fuel problem.check to see if you have spark at the plug.if so then you will need to see if its getting fuel.check this when it won`t start as when its working its pointless.to check for fuel you can spray intake cleaner into the intake when it won`t start,if it does then stalls when it has burnt what you sprayed then its a fuel problem.the pressure will have to be checked with a gage to get a proper reading.the pressure should be about 35 lbs.pumps are a common problem with this year.if no spark then you will have to find what component is causing the no spark.
0helpful
3answers

1995 e34 520i won`t start

i would check the fuse for the fuel pump and the relay.
Not finding what you are looking for?

25 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...