Question about 1994 Buick LeSabre

1 Answer

How to install throttle position sensor 94 buick lesabre

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

Locate the throttle body and on the side match your new T.P.S sensor, its usually held on by 2 screws, torx kind, so you might have to buy that screw driver since it is not common. remove and disconnect the old one and install. if its adjustable you need to set it, with a voltmeter. if its not just make sure it engages and slides in fine.

Posted on Aug 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 buick lesabre .sounds like it is sucking a lot of air thru the breather.


replace your PCV (positive check valve), this is the thick tube located at your valve cover

May 18, 2012 | 1994 Buick LeSabre

1 Answer

Cant get the throttle position sensor out on a 93 buick lesabre 3800 series 1


you may want to remove the throttle body from the plemum. the screws that attach the sensor often times strip out and you may have to drill them out.

Jul 28, 2011 | Buick LeSabre Cars & Trucks

1 Answer

Where is the throttle positioning sensor located on a 92 buick lesabre


The throttle position sensor is on the throttle shaft. It is opposite of the linkage. It has a plug with three terminals.

Dec 07, 2010 | 1992 Buick LeSabre

1 Answer

Where is the t.p.s iocated on a 94 buick lasabre?


The throttle position sensor is located on the throttle body and has a 3 wire connector.The wire colors are gray,blue,and black.Hope this helps.Good luck.

Dec 02, 2010 | 1994 Buick LeSabre

1 Answer

How do you replace a crankshaft position sensor 94 buick lesabre


Remove drive belt. remove harmonic balancer bolt with impact wrench, get a balancer puller to remove balancer so you can replace sensor.

May 17, 2010 | 2000 Buick LeSabre

2 Answers

Can you tell me where the throttle position sensor is located on a 1990 Buick Lesabre?


look to see where the accelerator cable is and directly opposite thru the throttle body is the location. This is near where the air filter attatches to the motor

Feb 21, 2010 | 1990 Buick LeSabre

1 Answer

My 94 buick lesabre stalls while driving and also is changing gears too quick.


check for possible crank sensor failure and check for broken linkage at throttle body. problems may not be related.

Nov 03, 2009 | 1994 Buick LeSabre

1 Answer

Code 22 and 34


Code 22 is throttle position sensor out of range.34 maybe map sensor.can`t remember,but the throttle position sensor will cause eratic idle.

Oct 25, 2009 | 1993 Buick LeSabre

1 Answer

Where are the throttle position sensor and the mass air flow sensor located on a '87 buick lesabre limited ???? thank you.


find the air filter and work your way towards the top of the engine. There will be a large black rubber hose that goes to an aluminum colored square shaped block with four bolts, one on each corner of the square shaped block. there will be a cable going to the throttle. on the opposite side of the cable will be the throttle position sensor with a plug in harness with two or three wires. The mass air-flow meter should be just behind the T.P.S.

Apr 22, 2009 | 1987 Buick LeSabre

1 Answer

1997 Buick lesabre limited when accelerating, most often on an incline, car shakes


Here's a list.
Retorque throttle body possibly the gasket
Spark plugs
test coils
plug wires
throttle positioning sensor
map sensor
camshaft positioning sensor
timing belt? not likely
knock sensor

Mar 12, 2009 | 1997 Buick LeSabre

Not finding what you are looking for?
1994 Buick LeSabre Logo

745 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...