Question about 1998 Buick Park Avenue

2 Answers

How do you change tail lights on 1998 Buick Park Avenue?

How do you change tail lights ?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,922 Answers

Open trunk lid inside there will be 5 or 6 large plastic thumb screws remove them and either 1/2 or the whole assy will come out,you'll have to remove wires on assy to replace lamps

Posted on Aug 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If they're the ones in the trunk lid, you'll have to remove the carpet/plastic piece covering it, then remove all the small 10mm nuts holding the panel on. If they're the ones on the outside, you need to remove the cargo net holder and the phillips head screws on the plastic panel and pop off the panel. Then there will be about four 10mm nuts holding the stop/tail/turn assembly in place.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buick Park Ave Lighting/Electrical Problem


the common system problem look like the headlights switch
and cluster back bulbs .... remove front panel cluster and remove headlight switch look for burn wire or connector terminal. test light
fuses all
hope it helps

Mar 22, 2014 | 2001 Buick Park Avenue

1 Answer

1991 Park avenue, Tail lights and license's plate light's stopped working turn signal's hazards and brake lights still functional. but no tail lights or license plate lights


Check for Power on your License Plate Light, more than likely you have lost GROUND

Turn Signals, Do the Front Work and the Back don't? If NONE then FLASHER FUSE

Apr 09, 2013 | 1991 Buick Park Avenue

1 Answer

My tail light is out over the license plate on my 1993 buick park avenue. How do I get to it to change it?


There will be 6-10 retainers (sometimes they are 10mm nuts and sometimes they are plastic speed nuts) holding the whole lens assembly to the trunk lid. Once those are removed you will be able to remove the lens assembly and access the bulb. There are six bulbs all together, two for the license place and four tail lights (not including the reverse lights) and they are part number 194. I usually recommend replacing all six while you have the lens removed from the trunk.

Nov 07, 2010 | 1993 Buick Park Avenue

1 Answer

98 Buick Park Avenue (Turbo) P0717 fault code,


CODE PO717 IS - A/T INPUT SHAFT SPEED SENSOR LOW INPUT CONDITIONS.YOUR INPUT SHAFT SPEED SENSOR COULD BE DEFECTIVE.CHANGE FLUID + FILTER IF IT HAVE NOT BEEN CHANGED IN A LONG PERIOD OF TIME.

May 29, 2010 | 1998 Buick Park Avenue

1 Answer

1998 Park Avenue: where is the fuse box on a 1998 buick park ave?...


i have a 98 buick park avenue
i got a problem running it. it start but when i hit the break pedal some light comes out the direction signal and it shuts off i check all the fuse

May 17, 2010 | 1998 Buick Park Avenue

1 Answer

Right rear tail lights only work when using turn signal or brake. Fuse under IP changed x2. What else could cause this?


its probaly the bulb it has 2 filiments 1 for the brake and turning the othr for side lites

Apr 13, 2010 | 1998 Buick Park Avenue

1 Answer

How to remove a burned out tail light in a 1992 park avenue


Open trunk and remove the plastic nuts that hold the tail lamp to the body. Pull out tail lamp and replace bulbs.

Jul 02, 2009 | 1992 Buick Park Avenue

1 Answer

Lic.Plate Bulb Change


look in your trunk there should be a cover on the back of your tail lights in the trunk. Look under it

Nov 24, 2008 | 1999 Buick Park Avenue

Not finding what you are looking for?
1998 Buick Park Avenue Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...