Question about 2002 Nissan Altima

1 Answer

Nissan altima 05

My alarm is constantly going off! How do I stop this.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 197 Answers

Outh this mate, it'll have to go back to Nissan to have the alarm recalibrated. It works either on a mercury switch, if you park on a hill for example, it will go off, if someone goes past your vehicle in another vehicle, the back draught will set it off, if some one accidentually falls on your car , it will go off. If you want to test the calibration, park it on a flat road, make sure the car it still, and the alarm is turned on, with the palm of your hand, 'slap' the windscreen. (not so hard as to break it, but just hard enough to make your hand sting!!!!) The alarm snould,go off. Next, do the same thing with the car parked on a hill, start with gentle tap on the screen and then advance to the palm slap. If it goes off early, take it back to nissan and they will charge you about £20 ($40) to adjust

Posted on Aug 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to check why my car alarm in 2006 nissan altima is not working


If it aftermarket(bunch of wires and modules under the dash on the drivers side) remove it. If it is still factory it takes a scanner.

Dec 03, 2015 | Nissan Cars & Trucks

1 Answer

Nissan altima key fob broke when dropped


The alarm will sound if the alarm was set before you dropped the key fob. Just put the key in the ignition and start the car, the alarm should turn off.

Jan 15, 2014 | 2002 Nissan Altima

1 Answer

Nissan altima alarm won't stop


????????????????? nor a year? ?????????????????? if nissan
Points
Problem with 1994 Jeep Grand Cherokee Nissan altima alarm won't stop

Oct 19, 2013 | 1994 Jeep Grand Cherokee

2 Answers

Ihave a 1998 Nissan Altima GXE...the alarm keeps going off for no reason...pulled fuses and battery cables but still having the same problem....now car won't turn over to crank! Everything is back the way...


I have a 2000 Altima GXE. My alarm goes off intermittently and sometimes will not stop until battery lead is pulled. Have removed fuse and relay. Please help :)

Oct 24, 2010 | 1998 Nissan Altima

1 Answer

Removing 05 Nissan Altima Drive Axle


YOU NEED A HAYNES REPAIR MANUAL.IT HAS PHOTOS TO SHOW YOU HOW TO REMOVE DRIVE AXLE.

Jan 24, 2010 | 2005 Nissan Altima

1 Answer

The alarm on my 08 Nissan Altima keeps going off. The trunk, doors and windows are all closed.


YOU WILL REQUIRE DIAGNOSTIC TO DO THIS BUT IF YOUR VEHICLE IS LOCK IN A SAFE AREA JUST LEAVE ONE COMPONENT OPEN AND CHECK IF THE ALARM WILL SOUND AGAIN REPEAT THIS TILL YOU FIND THE DEFECTIVE COMPONENT.

Jul 21, 2009 | 2008 Nissan Rogue

2 Answers

My car alarm is blinking but the remote doesn't work. I already replaced the battery to the remote so I know that's not the problem. If I open the car the alarm goes off and doesn't allow me to start the...


You need to first look under the drivers side dash area near the hood release/fuse panel area and see if there is a valet switch. The switch will look like a little toggle or a push switch. After you locate it, turn the ignition switch to the on position(dont start it) and flick the valet to the opposite position it is in now. If done correctly in most cases the red system light will stay a constant instead of off or blinking indicating you are in valet mode. Next try to start the engine. If this doesnt work you need to remove the alarm system and repair the ignition switch wiring or replace the electrical portion of the ignition switch. The aftermarket alarm cuts into the ignition switch wires and bypasses the start circuit through the alarm module. When disarmed the alarm completes the circuit and allows the car to start. Good luck hope this helps and please rate this.

Nov 05, 2008 | 1997 Nissan.5 Altima

Not finding what you are looking for?
2002 Nissan Altima Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...