Question about 2005 Chrysler Town & Country

3 Answers

Unlock button on key won't work.The lock button doesn't work either. We have to put the key in the door to unlock and push the button down to lock the doors.

Posted by on

  • Michael Beverlin May 11, 2010

    Have you checked all the fuses related to inside electronics??

×

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 186 Answers

Sounds like the button in the master switch, as all power must go through there. Also open door and between the door and jamb there will be a harness wiggle that while trying us the lock button, wires are known to brake there.

Posted on Aug 02, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,188 Answers

Replace batteries inside the key remote. Take it to an electronics repair and ask the person to change them.

Posted on Aug 02, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Do your lights still flash and horn beep when you depress the remote? If so, the remote is obviously still working. My 2005 T&C has done these twice. Both times, I disconnected the negative battery terminal overnight and it corrected the problem. This resets the onboard electronics.

Posted on Aug 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key fob dont work, but door lock works ok, key fob battery change.


1. Get in your vehicle.
2. Close the door.
3. Put key in ignition
4. Do not turn on the ignition yet.
5. Hold down on the unlock button on the door panel. Do not let up.
6. Turn the key to ON, OFF, ON, OFF (while still holding the unlock button on the door panel).
7. Release the unlock button.
8. The door locks should cycle, indicating that you did everything correctly.
9. Have all your remote entry fobs available. Hold down on both the lock and unlock buttons until the door locks cycle. Do the same on all key fobs. This will re-program all of them.
10. Turn ON the ignition key to exit the program mode.
11. DONE.

Apr 18, 2014 | 1999 Chevrolet Silverado 1500

1 Answer

2000 cadillac deville driver side won't open with the key


1) Key turns but dose not unlock door. This means that the rod that goes to the back of the lock has came off. This also means that is the reason door is not unlocking with the remote as it pops the lock rod inside the door which pushes the lock open.
2) Key does not turn lock at all but works passengers side door. This means that the locks has been changed in the door, but that doesn't sound like the problem as you say the remote doesn't open the drivers side door so more than likely the rod has came off the back of the lock

Nov 07, 2012 | Cars & Trucks

1 Answer

All my remotes won't unlock passenger doors, why?


this is a problem that can appear after your car battery died, cause the car didn't reset propely, so taking the battery out and putting it back in or letting your car die again would do the trick. I tried a lot of reprogramming procedured for my remote key, none of them worked, what did the trick though was simply unlocking the doors via the all door unlock button on the passenger side door, so simple.

Apr 27, 2012 | Cars & Trucks

1 Answer

I changed the key batteries for my 1999 BMW 323i after they died. Afterwards the remote unlock and lock won't work, the car also won't start but it can turn over/on and the radio and the lights...


stick the key in the ignition, turn it to the on position, remove it within 5 seconds, then hold the unlock button down and press the lock button 3 times within 10 seconds and release both buttons. The doors should lock/unlock to give you confirmation and your key should work.

Jul 05, 2011 | 1999 BMW 323 Series

1 Answer

Neither of our remotes would unlock our doors on our 2003 Silverado Z71 the other day. So we tried by unlocking it with the key. That did'nt work either. Finally, we put the key in the lock and waited for...


TRY Relearning the remotes. to do this get in vehicle with doors closed hold the unlock button down on drivers door while you cut key on and off two or three times you should hear locks cycle and horn chirp. let go of unlock button and hold both lock and unlock button down on one key fob for 15 seconds or so you will see locks cycle move to next remote and do same. then cut key on to exit learn mode. as far as door not unlocking with key this is a problem with lock cylinder most likely.

Feb 16, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

How come on a 2002 GMC Denali if you lock your key inside


i would say the theft module saw the door trying to be open without the door lock or fob first, once the door lock button was pushed it shut down, it new doors were trying to be unlocked in a theft manner, once shut down it needs time to reset or needs to see ignition cycle with key and read chip in key, smart system isnt it, good luck.

Oct 21, 2009 | 2002 GMC Yukon Denali

4 Answers

Program a remote key for 03 A6


I have an A4 and did this to re-program my key:

1. used the key to start the car...then turned it off
2. put the key in the driver door (door closed)
3. pressed the lock button on the key fob once
4. turned the key to lock the door.

This is basically the steps in the owners manual, but the car must be started with the key first, and the key must be in the door lock before pressing the lock button.

Dec 10, 2008 | 2003 Audi A6

1 Answer

Drivers door doesn`t unlock when the weathers cold or it`s raining


weird this one, has a transistor playing up but where ??

Oct 05, 2008 | 2001 Volvo S60

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...