Question about 2000 Hyundai Elantra

1 Answer

Im redoing the brake pipes on my terracan do i have to keep the two pipes coiled at the front

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You dont have to but the coils are there to absorb vibration. So long term damage may occur.

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2001 Terracan highlander has coolant leaking under the engine.Can someone tell me where the leak is coming from and how to fix it? The car has a v6 3.5l engine.


Could be welsh plugs on side of engine are corroded.
Could be a smaller pipe like a heater hose pipe or an auxilary cooling pipe .Had one of these little extra pipes on a mitsubishi sigma under the inlet manifold that was leaking.
Did you use a coolant in the engine as water can corrode welsh plugs in engines as I found out on my car !.

Jun 11, 2016 | Cars & Trucks

1 Answer

Hi Im trying to wire a set of spoties into the high beem circuit through a switch in the cabin but it seems to have a neg switch system can you supply a dia to help me . 06 Terracan Highlander Cheers...


You need to tap into the high beam RELAY power. The computer uses a signal to switch on the lights, it sees a signal and tells the relay to come on using a lower voltage or even as you suggested a ground, when the relay closes it sends voltage to the lights.

Oct 20, 2013 | 2005 Hyundai Terracan 2.9

1 Answer

I have a 1993 chevy cavalier, my front right brake is sticking. brakes keep grabbing. whats my problem


replace the front calipers ,check the flexable hoses as well as they can cause the brake to lock on when the pipe inside the flexible hose fails

Apr 17, 2013 | Cars & Trucks

3 Answers

2005 terracan recently started engine check light coming on ONLY towing boat.error codes p1119 and p1120.Anyone any idea why because Hyundai dont


HOW ARE THE BRAKES WORKING FOR YOU THIS MAY BE A ANTI-LOCK BRAKE PROBLEM HOW HEAVY WAS THE BOAT YOU WERE TOWING, & DID YOU HAVE ANY PROBLEMS STOPPING WHILE YOU WERE TOWING THE BOAT?

Dec 28, 2012 | 2005 Hyundai Terracan 2.9

1 Answer

1991 buick park avenue brake problem had busted brake line on drivers side rear brake so i fixed it then bleed the brakes.aint getting no brake fluid comming out of the passenger side rear so took of the...


Hi Chris, The brake system is basically very simple. If you have duel braking on your vehicle, the usual method is having two brakes operate on the front with for example the left rear and the other system will also operate two front and the right rear. This type of system will have two calipers on each of the front wheels. The tandem system works in a slightly different way, having the forward part of the cylinder pressurizing the rear brakes and the rear part of the cylinder pressurizing the front. I think under the circumstances you are describing, I would have a friend sit inside and pump the brakes repeatedly until the system becomes pressurized (maybe twenty thirty times of pumping the brake pedal) and then ask him or her to keep it pushed firmly down until you find out where its leaking. The amount of brake fluid you report having been sed would indecate a severe leakage. Check the lower parts of the rear wheels for signs of leaking wheel cylinders and then dito for the front wheels. Any signs of wetness at these areas and along the brake system (the plumbing or pipe work) will indicate where the leakage is. If you cannot identify a wheel which is leaking, carefully inspect around and blow the master cylinder and if this no sign go along the fluid lines, taking special note of where the damaged pipe was repaired. If there is a blockage in the line, air may be trapped at that point causing difficulty in pressurizing. Once the place of leakage has been identified it must be attended to before bleeding the system. When bleeding, begin with the wheel furthest from the master cylinder, and work your way back to the master cylinder one wheel at a time, until you reach the closest.Keep in mind that you may find it required to pump the pedal many many times before opening the bleed nipple.Regards John

Oct 29, 2011 | 1991 Buick Park Avenue

1 Answer

Im changing the wires on my f150 4.2L v6 2wd. now im not sure what order my wires went. i tried to do it one at a time. but i did sumthin wrong, cause when i got to the last wires i needed a small wire and...


The COIL PACK TOWERS are numbered : coil----3---4 pack---2---6 plug----1---5 ----------------------------------------------------------------- The engine cylinders / spark plugs are numbered : passenger side , front to rear , 1 , 2 , 3 -----drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------- The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )

found this online hope it helps

Nov 07, 2009 | 1999 Ford F150 Regular Cab

2 Answers

Hyundai terracan 2.9 deisal 04 runs fine when feul tank is full but when it gets to quater of a tank of feul starves it self of feul then engine light comes on and stalls. to get it to start again you...


dear friend: i think that your terracan is actually running out of fuel even if the guage shows quater,you can also put the old fuel filter back and try it,we did discover some of the new filters sucking air.

Sep 09, 2009 | 2004 Hyundai Santa Fe

1 Answer

Right front brake caliper freezes up on occassion


You either need to rebuild it correctly, or replace it - which is the most common thing to do. Since you probably have crud in it, you may have the other side crud up as well, so the best thing to do would be to change both. -or redo both brakes on the front end. Hope this helps, Rick

May 04, 2009 | 1997 Hyundai Accent

1 Answer

Cant break the nut on the front hub free to expose the wheel bear


no , threads are normal , the torque is like 175-200 ft lbs , if your not using air tools you might put a pipe over your 1/2" breaker bar or ratchet , for more leverage , have somebody hold the brake pedal inside while you break it loose . keep trying . we know you can do it .

J5

Jan 18, 2009 | 2003 Kia Sedona

1 Answer

Bleed brakes


first you must fill brake master cylinder star the engine get someone who can go in side the car to pump brake pedel keep puming check the how is the brake flude going through the pipes fil again if it not full tell him to keep down and hold brake pedal now you bleading the system front side have look the niple when you relese the presure close then tell him to keep pedeling keep going several times tell him to keep and hold the bedel down relese the pressure again, close fill the brake fluide finish front side like that way come rear wheel do same like front.
check any leaking.

sorry my english

Oct 14, 2008 | 1997 Chevrolet Cavalier

Not finding what you are looking for?
2000 Hyundai Elantra Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...