Question about Audi 80

1 Answer

I have adudi 80 1994-front bearings

I have adudi 80 1994-having a problem changing front bearings-cannot get them out of hubs-any ideas?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 167 Answers

Take them to an engineering shop and get them pressed out .Or buy a press and do it yourself...First option is cheaper.
And get them to press the new one's in.

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda mpv 2006 repack wheel bearing


There is a little difference between the front and rear. The days of packing wheel bearing is almost over. The front bearing you have to pull the hub and change to bearing. The rear wheel you have to change out the hub bearing and all. The front is a sealed bearing and not serviceable. Please rate my answer so I am rewarded points for it.

Jan 29, 2012 | Mazda Cars & Trucks

1 Answer

How do I change front hub and bearing assembly on 2004 Explorer


Front hub bearing, remove tire, remove caliper and caliper holding bracket, you do not have to remove brake caliper from brake hose, just set it aside, if 4X4 remove front axle nut that goes through center of rotor, also remove brake rotor, disconnect elec, A.B.S connector, remove three bolts on back side of hub bearing, remove hub bearing, some times you will need to knock hub bearing out with a hammer.Reverse to install new hub bearing.

Jul 09, 2010 | 2004 Ford Explorer

1 Answer

On my 2001 Dodge Ram 1500 5.2 2WD, I just found


This is a very simple job to do. Raise the front of truck off the ground,block the rear tires. Using pliers and a hammer,remove the grease cap from hub. Remove the cotter key and nut from axle,pull out slowly and remove outer bearing. then remove hub from axle. To remove inner bearing ,prop hub on a board and use a large punch to drive out bearing and seal. Clean out inside the hub and install new bearing and seal. Replace all parts in the reverse as you took them off. Hope this will help you.

May 14, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

On my 2001 Dodge Ram 1500 5.2 2WD, I just found out that I have to change the front hubs if I want to replace the front wheel bearings. How insane is that! What can I do to have a front hub that I can...


buy an older truck to answer question all newer model vehicles have gone to a hub/flange bearing assembly these bearing setups handle loads without or very minimum variance, when you go into a cornering situation these bearing setups give you a steady and consistent track thus a better handling vehicle now instead of cleaning and repacing tose old cone and race style bearings you just unbolt hub assembly and any related abs sensors and bolt on new

Mar 24, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Front bearing in 2001 ford escort zx2


im pretty sure this is a sealed hub unit all you do is unbolt the old hub from the back of the spindle and knock it off with a hammer and put the new one on... the bolts may be in the front but you get the idea

Apr 30, 2009 | 2002 Ford Escort

2 Answers

Change front wheel bearings


u will need to remove the brake cailper and the the brake rotor, then the hub retaining nut, that is a large metric nut, the bearing and hub must come off, then u will need to take this hub to a machine shop or the dealer and have the new bearing pressed in.
BCA/NATIONAL Part # 510078 moreinfo.gif {Ball Bearing Bore=1.5354" Outer Diameter=2.9134" Width=1.4173"}
Front Wheel PRICE: $47.99, PART SOURCE: Rockauto.com

3bcf37f.jpg

Mar 12, 2009 | 2003 Hyundai Tiburon

2 Answers

Noisy front wheel bearing


It is possible but i do reccomend changing the bearing races in the hub when you do it to prevent any premature wear on your new bearings. A new hub/rotor assembly will come with new races installed if that makes it any easier.

    130890.gif
    tif.gif
moz-screenshot.jpgmoz-screenshot-1.jpg

Dec 12, 2008 | 1998 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...