Question about 2006 Dodge Durango

1 Answer

2006 Dodge Durango stuck in neutral

2006 Durango stuck in neutral linkage working transmission seems to have no gears

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Dodge Master
  • 3,433 Answers

Front pump failure or valve body internal leakage. Trans pn needs to be lowerred to ck and at a shop. Sorry

Posted on Aug 02, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1988 Dodge Ram 50 Automatic shifts into park reverse and neutral. But physically won't go into drive gears.

Disconnect shift cable from transmission linkage and try to manually put transmission in drive gear ( make sure wheels chocked/park brake on ). If transmission goes into drive gear, suspect a shift cable or shifter assembly problem. If you can't manually shift into drive gear by hand with cable disconnected, suspect internal transmission/shift linkage issue

Mar 10, 2016 | Dodge Cars & Trucks

1 Answer

When I started my 2002 Dodge Durango 4.7L and try to put it into 'DRIVE' it got locked up and I couldn't put it into ANY gear. I had someone tell me it may possibly be the gear linkage. HE

Well, if the problem is in the linkage between the trans and the shifter, you should be able to disconnect the linkage or cable and move the shift rod in the transmission by hand.
Make sure the parking brake is set since it won't be in park.

Jan 25, 2013 | Cars & Trucks

2 Answers

My back up lights don't work, what should i do?

check 15 amp fuse (may be in engine compartment relay box). If fuse is good, check switch on transmission. To check the switch, pull the connector off and short the two outer terminals together. With the key on, the backup light should come on. If they do, replace the switch. The switch looks something like this:

The neutral safety switch, otherwise known as the park/neutral position switch, prevents the vehicle from being started in any position other than PARK and NEUTRAL. It also functions as the back-up lamp switch.
The neutral safely switch is threaded into the transmission case. When the gearshift lever is placed in either the PARK or NEUTRAL position, a cam, which is attached to the transmission throttle lever inside the transmission, contacts the neutral safety switch and provides a ground to complete the starter solenoid circuit. The back-up light switch is incorporated into the neutral safety switch.
The center terminal is for the neutral safety switch and the two outer terminals are for the back-up lights.
There is no adjustment for the switch. If a malfunction occurs, the switch must be removed and replaced.

Oct 19, 2010 | 1998 Dodge Durango

1 Answer

2000 Dodge Durango will not shift out of 2nd gear

It seems to be stuck in 4x4 still. There could be damaged done to the powertrain by the towing company. Therefore they should be held accountable for the damage and repair that will be needed. You never tow a vehicle in 4x4 it should be carried on a flat-back. Same with AWD vehicles. The towing companies are well aware of this, is their business to know. Make sure to disengage the 4x4, put the 4x4 shifter on the floor in neutral while in park or not moving. If you continue to have problems contact the towing company and hold them accountable for it. See what you can work out with them. If they tell you they are not responsible then contact a lawyer and make them responsible for it.

May 19, 2009 | 2000 Dodge Durango

1 Answer

Wont go into gear inless in 4Lo

Try putting transmission in neutral, not park, then transfer case to 2 wd or 4 high, then transmission into gear.

May 01, 2009 | 1999 Dodge Durango

1 Answer

05 Durango transfer case will not engage, stuck in neutral. How or what is causing the problem, how can I fix it?

I had this happen to me today and found that it was a simple linkage problem.

If the 4WD-Neutral-2WD stick on the floor console moves freely try crawling under the vehical and make sure that the shift linkage is attached to the transmission. On mine I found a cotter pin had broken and the shift lever was not staying connected.

Make sure the shifter on the steering colum is in neutral and engine off when making these repairs.

Good luck

Apr 04, 2009 | 2005 Dodge Durango

1 Answer

I just purchased a 2006 Dodge Ram 3500 Mega cab. When I shift from drive accross Neutral to Reverse, the RPMs go way up then down like I hit the gas pedal or something. It also does it when I go from...

on some of the older (1996-2000) Ram products, the transmission kick-down linkage crosses the throttle cable assembly. if someone has worked on that, it may be rubbing each other when you shift, causing the "bump" in RPM's.

Oct 10, 2017 | 2006 Dodge Ram 3500 Truck

Not finding what you are looking for?
2006 Dodge Durango Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides