Question about 2002 Ford Explorer

1 Answer

2002 ford explorerv wont crank... help!!!!!!!!!!!

My 2002 Ford Explorer upper hose blew off while on highway. immediately exited and seen the hose. re-attatched hose, put water in truck and now it will not turn over. mechanic shop tested wires and fuel pump.. both good. ive changed plugs and wires. Comments:
can i check the coil / coil pack?
turns over kinda weak and sounds like its spinning faster?
A Different mechanic checked and it is getting fire, and fuel pump is working properly. he thinks it may have jumped timing.. He doesnt sund too sure. any advice?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Check your crankshaft positioning sensor. how many miles is on it? may have broken your timing chain.

Posted on Aug 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Upper ball joint torque specs 2002 explorer xls 4x4 4.0L v6 gas


Douglas, 90 lb-ft is ball joint nut torque.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Upper Control Arm and Ball Joint 2002 05 Ford Explorer...

Apr 02, 2016 | 2002 Ford Explorer

1 Answer

MY 2002 FORD EXPLORER WONT XLS WONT CRANK


do you have smart lock? picture of a red hand in instrument panel? im sure they do. If so ****** in park hold key to start position & hit dash upwards & inwards on the left hand side of the steering colum if the problem is the smart lock module it will start. Common prob with fords & that is the cheap fix it will work every time you have the problem

Oct 05, 2012 | 2002 Ford Explorer

1 Answer

98 ford explorer cranks wont fire


Check your Cam,MAP,MAF sensors.

Mar 07, 2012 | 1998 Ford Explorer

1 Answer

Why does my 2002 Ford explorer crank over but wont start?


check for fuel at injectors could be fuel pump or shut off switch

Jan 08, 2012 | 2002 Ford Explorer Sport Trac

1 Answer

How to replaced thermostat on a 2002 ford explorer


You're going to lose some coolant, so have a bucket or other container, and some fresh coolant ready. Follow the upper radiator hose to the point where it's connected to the engine. The hose is clamped to a metal housing (water inlet) which is bolted to the engine. Remove the bolts (not the hose) and lift the housing to expose the thermostat (may require a little prying with a screwdriver or similar tool). Note how the old thermostat is fitted (which end is up), lift it out of the engine, and then remove all traces of gasket from the housing and the engine. Install the new thermostat and gasket, replace the bolts, add coolant as necessary, and you're done.

Before you start the job though, check the condition of your upper and lower radiator hoses. If they show any signs of wear, fraying, or fatigue, you might as well replace them too.

BillB

Jan 14, 2010 | 2002 Ford Explorer

1 Answer

My 2002 Ford Explorer wont crank!


I'm assuming the coilpack got wet!! Check if there is any power to the coil before changing. If thats fine, replace the coil. If there is no power, check your electrical circuit for the coil. Hopefully this helps

Jul 23, 2009 | 2005 Ford Explorer

2 Answers

My 2002 Ford Explorer upper hose blew off while on highway. immediately exited and seen the hose. re-attatched hose, put water in truck and not it will not turn over. mechanic shop tested wires and no...


Does your engine turn over?When you say your upper hose blew off To me it meant your engine ran hot.You put the hose back on and filled the truck with water.So you drove it to the shop?Did you have to tow the truck after this happened?I don' know what to say! It seems like you have a blown head gasket,or you blew your engine,I need more info to help you.

Jul 23, 2009 | 2005 Ford Explorer

1 Answer

I have a ford focus se 2002


No it sounds like your water pump bearing has worn causing the leak.Change the water pump.

Jul 03, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
2002 Ford Explorer Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...