Question about 2001 Isuzu Rodeo

1 Answer

Right way to replace belt on power steering to izuzu

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 125 Answers

By taking the load of the auto tensioner. its spring loaded ... use the right socket 17 or 19 mm?? and a breaker bar or long handled ratchet

Posted on Aug 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Izuzu Rodeo 19998 Is the vehicle driveable with a leak of fluid on power steering line?


If it just a smear yes but if it is dripping, I wouldn't want to damage the pump. Replace the broken pipe first.

Mar 13, 2017 | Cars & Trucks

1 Answer

Power steering works until the car runs a little while. Then gets stiffer and harder to turn as you go. 1999 Izuzu Rodeo 4cyl


Power steering pump is probably about to fail? You can try a Quality power steering fluid Conditioner as a temp fix ?

Feb 21, 2015 | Cars & Trucks

1 Answer

1991 1.8 Fox Steering unusually stiff and squeek when wheel is turned. Alignment was adjusted today but the problem persists


Hello and welcome to FixYa!

The problem can be on the power steering pump itself. If the power steering pump is faulty, the power steering fluid does not circulate properly. One good reason why it squeaks when wheel is turned. Check the power steering belt too if they are not sloppy. If it is, adjust the pump to tighten the belt.

But before doing the power steering pump replacement, please do check the power steering fluid level. You may need to fill it up a little and turn the wheel from left to right. By turning the wheel to the max left and max right, the steering fluid will circulate and may get rid of the problem.

If the problem still persists after putting on new fluids, go for the power steering pump replacement. Be sure to tighten the power steering belt after replacement.

Hope this helps and thank you for using FixYa! Have a good one!

May 10, 2011 | 1991 Volkswagen Fox

1 Answer

How do i replace the steering belt on a 2003 Hyundai Santa Fe


Hi,

Steps for Removing the Power Steering Belt would be :-

1. Apply the parking brake.
2. Jack the right front and support with a jack stand.
3. Remove the under engine cover, if present.
4. Remove the right side splash shield.
5. Support the engine with a floor jack and a block of wood.
6. Remove the engine cover.
7. Remove the engine mount.
8. Remove the 10mm bolt attaching the power steering pressure line to the body.
9. Remove the alternator-A/C belt.
10. Remove the power steering belt.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 08, 2010 | 2003 Hyundai Santa Fe

2 Answers

I replaced my altenator a week ago. Now my power


There are several possibilities.
1. power steering pump locked up or locking up (extremely low fluid could cause this)
2. a random pully could have locked up and caused the belt to break, resulting in a loss of power steering.

Hope this helps

Sep 29, 2009 | 1997 Hyundai Elantra

1 Answer

When I go to turn the wheel in my 2000 ford ranger I hear loud squealing noises. I checked the power steering fluid and its full. What can it be?The squealing starts as soon as I turn the wheel to the left...


The power steering pump is normally connected or driven by the engine with a V-belt. A loose belt can cause squealing as soon as the power steering come under load (e.g. steering left or right while stopped).

Check the tension on the V-belt directly connected to the power steering pump. This may need replacement.

Hoep this helps.

Jul 01, 2009 | Ford Ranger Cars & Trucks

2 Answers

When my serpentine belt broke three times the problem was diagnosed as the power steering pump. Why wasn't this diagnosed when the tensioner was replaced. I am now replacing the power steering pump and...


That is a valid question, but you should ask the shop that worked on it. Also do you know that the power steering pump will cure the problem? This remains to be seen....You can check one thing though...Look at the belt/pulley arrangement from the side. any pulley that is not exactly in line with all others, and any wobbling pulley is suspect. Serpentine belts are far less forgiving of these items than were "v" belts.
Good luck

Mar 30, 2009 | 2003 Subaru Outback

1 Answer

Need the belt diagram for the water pump belt for a 95 Auroa


42161874BELT, REPLACE
  1. Release belt tension and remove belt from power steering and alternator pulleys. Twist belt to get between tensioner and front cover and between power steering pulley and engine mount bracket.
  2. Raise and support vehicle.
  3. Turn wheel to the extreme right and remove right side splash shield.
  4. Remove belt from crankshaft and A/C compressor pulleys. Twist belt to get between idler pulley and engine mount bracket.
  5. Lower vehicle.
  6. Twisting new belt to get past the front cover, install belt around power steering pump pulley, Fig. 15. Allow belt to hang free.
  7. Twist belt to get between tensioner and front cover, wrap belt around alternator.
  8. Remove belt from power steering pulley and set aside.
  9. Raise and support vehicle, then twist belt to get between tensioner and front cover, wrap belt around crankshaft and A/C compressor pulleys.
  10. Install right side splash shield and lower vehicle.
  11. Position belt around power steering pulley and release tensioner.

Nov 23, 2008 | 1995 Oldsmobile Aurora

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...