Question about 2005 Chevrolet Tahoe

1 Answer

Transmission grinds when put in reverse and dosn't move. takes drive good

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 124 Answers

Pull the dipstick, engine running in park. If the level is too low or too high, adjust it. But it sounds like your main concern will be the condition of the fluid. Look at it, smell it, feel it. Is it black? Does it smell like burning? Is there shavings in it? If you said yes to any or all of the three, your tranny's fried. Have it rebuilt, replaced or buy a new vehicle, whichever is more cost evective.

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 Toyota Camry 4 cylinder automatic transmission. I was driving about 10 mph when it just stopped moving. The engine starts and runs fine but when I put it in drive or reverse it won't drive....


You have internal problems with it. Clutches are bad, or could be a hard part broken. The grinding is from the inside of the transmission turn and you put it in park. This is a normal sound, if you were driving and slammed it in park. Except your not moving.

Dec 30, 2014 | Cars & Trucks

3 Answers

I hear a grinding noise whenever I put the car in drive or reverse, what could be the problem is it the transmission?


first thing i would be doing is if u can lift the frot of the car and with someone in the car e brake on and put it in drive and one person under it to hear where the noise is coming from as it could be a shaft or like colin h says it could be the trany ison its way out

Apr 23, 2014 | 2004 Mazda 6

1 Answer

Grinding sound


Is the knocking sound when the car is moving or sitting still as well? Does the grinding sound happen just as you put the car into reverse or does it keep grinding?
These transmissions are very problematic, especially if they are not properly maintained. The most likely candidates are a cracked flywheel or a broken drum inside the transmission. Either way, it sounds like the transmission will have to be removed to pinpoint the problem.

Mar 30, 2014 | 2003 Chrysler PT Cruiser

1 Answer

97 wrangler wont drive forward in 2wd. just makes a loud grinding noise but will drive in reverse


sounds like rear end is coming apart
google wrangler forums and post there

Feb 03, 2013 | 1997 Jeep Wrangler

1 Answer

Won't drive in reverse


Failed Transmission Again

Part with it

Get something else

Maybe American (Rear Wheel Drive Only)

Dec 12, 2012 | 2001 Mazda Tribute

1 Answer

Auto transmision grinds in reverse, put in dr grinding stops but doesn't move


sounds like it is time to get the transmission rebuilt. usually when they go out you will only have reverse. It sounds like the oil pump has exploded inside the trans. sorry for the bad news

May 27, 2012 | Mazda MPV Cars & Trucks

1 Answer

Hi just wnated to make sure before I bought a used transmission thats it is for sure the transmission. I was able to drive the car home came out the next morning to drive put in reverse backed up and then...


Sound like a transmission problem or at the very least a differential problem. The only way to know for sure is to have it looked at by a pro.

Dec 03, 2009 | 2000 Volvo S40

1 Answer

Possible Tranny problem...


I am sorry to have to tell you this but it sounds to me like your transmission is shot and will need a rebuild. If you can get it to a transmission shop they will tell you 100% what wrong with it. .

Apr 06, 2009 | 1998 Dodge Grand Caravan

1 Answer

01' F-250 SD noise in trans


have the transmission rebuilt sounds as if drive gears are wore out.

Oct 09, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
2005 Chevrolet Tahoe Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...