Question about 1991 Chevrolet S-10

3 Answers

Wipers not working at all and the fuse is ok on my vw jetta

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Unplug wires at the motor.Then with the wipers switched on check for a 12 volt reading.If you are getting 12 volts then your wiper motor needs replacing If your not getting 12 volts then the switch is faulty replace it.Good luck.

Posted on Aug 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 186 Answers

On the S10 they us a ground tab located on themotor that has been known to brake check that before condemming the motor

Posted on Aug 02, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Check the wiring from wiper motors to fuse. See if there is a relay in betwen there that can be replaced.

Posted on Aug 02, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: VW Touran 2.o TDI Wiper Problem

hi
its weird ,but you know wipers is not working when computer senses open hood , so you have to look at hood catch. i'm not sure contacts have to be closed or open . anyway it is easy to check
good luck

Posted on Jul 13, 2009

alicantecoli
  • 22156 Answers

SOURCE: 2002 VW Jetta WAGON GAS TANK DOOR LOCKED

look for an emergency pull cable in the boot (trunk) it should have one

Posted on Jan 31, 2009

  • 137 Answers

SOURCE: VW Jetta GL 2000, AC - Heater Fan stopped

is your jetta a 1998 or 2000? the site is showing two different years. here are instructions for a 2000 jetta gl. there is a blower motor resistor in this system. there is also a fuse integral to the resistor. it's all one unit, have to replace the whole thing. here's the step by step:
1.remove the glove box (what you need to get to is behind it)
2.disconnect the electrical connector from the blower resistor
3.disconnect the heater fan electrical connector
4.remove the blower resistor
5.remove the blower motor downward
and to reinstall
1.install the blower motor
2.install the blower resistor
3.connect the electrical connector to the heater fan
4.connect the electrical connector to the blower resistor
5.install the glove box
and of course anytime you work on anything electrical you are supposed to disconnect the battery negative terminal before you start, be warned that you might lose your radio station presets when you disconnect battery
hope that helps

Posted on Jun 01, 2009

  • 1071 Answers

SOURCE: i need a fuse box map for a 2005 vw jetta 2.5.

lift up cowl in front of wipers and unplug the motor

Posted on Jul 21, 2009

steve_e_uk
  • 1675 Answers

SOURCE: 2000 VW jetta VR6 windshield wipers wont work

first try the fues box see if you have a blown fues, next if you put your wipers on can you hear the motor running for them? if you can the linkage has poped off from the motor, its a bit awkward to get it back on and no gaurentee that it will saty on, you might have to replace linkage, or, it might be the cogs on the actual wiper arms have splayed and are now smooth so they dont grip to move, you can take them off by the nut on the arm , get a can (coke can or simular) cut a rectangle out of it the hight and width if the cog, rap it round the cog, (make sure it does not overlap on the ends) and force the arm back into place and then do the nut up, this is just a short quick fix if that is the case you will have to replace the motor, also you can check the relay to the motor in the fues box, give it a tap a couple of times it might work again if not replace it...hope you find these sugestions helpful

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 vw jetta wiper problem


check in hand book for relay position

Dec 06, 2015 | 2006 Volkswagen Jetta

1 Answer

2006 vw jetta wiper still not working after changing the wiper motor and wiper switch ? help


Did you check the fuse? Have power at the plug? could be a bad ground.

Dec 06, 2015 | Evan Cars & Trucks

1 Answer

What has caused the windshield wipers and washers to quit working on my 2006 VW Jetta TDI


First thing I would check is the fuse for the wipers. That's usually the problem

Nov 24, 2014 | 2006 Volkswagen Jetta

1 Answer

Fuse panel diagram for 2005 VW Jetta 2.5


i am having trouble with power windows at first it was the switch and then the motor now that i replace both it won't work at all gas cap wont open and windows dont go up i check both fuses boxes and fund no burn fuses can you please help is for a 2005 VW Jetta 2.5

Feb 24, 2012 | Cars & Trucks

2 Answers

2000 VW jetta VR6 windshield wipers wont work


first try the fues box see if you have a blown fues, next if you put your wipers on can you hear the motor running for them? if you can the linkage has poped off from the motor, its a bit awkward to get it back on and no gaurentee that it will saty on, you might have to replace linkage, or, it might be the cogs on the actual wiper arms have splayed and are now smooth so they dont grip to move, you can take them off by the nut on the arm , get a can (coke can or simular) cut a rectangle out of it the hight and width if the cog, rap it round the cog, (make sure it does not overlap on the ends) and force the arm back into place and then do the nut up, this is just a short quick fix if that is the case you will have to replace the motor, also you can check the relay to the motor in the fues box, give it a tap a couple of times it might work again if not replace it...hope you find these sugestions helpful

Feb 08, 2010 | 2000 Volkswagen Jetta TDI

1 Answer

Wipers wont work wiper motor humms but wipers wont move i can move them with my hand very easy and fuse is ok


tighten the wiper arm nuts vw know for loosenign up. don't wipe ice off or it will happen again

Jun 30, 2009 | 1998 Volkswagen Jetta

2 Answers

Steps for replacing wiper motor for 1998 VW Jetta 4 cyl.


remove wipers. remove plastic covering by loosening plastic screws first. unplug wiper motor wires. there are about three 10mm nuts at the motor location and you also have to unscrew the big nuts that were below the wipers when you unscrewed them. replacement is reversal.

Mar 23, 2009 | 1998 Volkswagen Jetta

2 Answers

Signal and windshield wiper aren't working


switch in steerig console combo wiper turn?

Mar 01, 2009 | 1999 Volkswagen New Jetta

Not finding what you are looking for?
1991 Chevrolet S-10 Logo

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...