Question about 1997 Mercury Mountaineer

2 Answers

My 2001 mecury mountianeer. fuse # 18 shorts out.. everytime i put a fuse it pops..it works the seats an door locks.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Try unplugging the connectors one at a time then put a new fuse in to se which accesory is causing problem unplug seat at the motor connector, unplug power locks at lock switch on each door one at a time if thats not it then you can start unplugging the lock actuators one at a time

Posted on Aug 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

You have a loose wire grounding out and your fuse will keep poping till you find that grounding point !! check all the appropriate connections and harnesses. I hope this helps good luck

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why did security and service engine soon lights come on?


Power windows may not work due to faulty body control ...

repairpal.com > Problems > Pontiac > Aztek
Pontiac Aztek Power windows may not work due to faulty body control module. ...2001 Pontiac Aztek140,000Visitor ... air conditioner pump not engaging no power to relay . fix remove fuse # 28 bcm pump engaged air worked also a short term ...

Aug 30, 2015 | 2001 Pontiac Aztek

1 Answer

Just bought a second hand 2001 VW Cabrio, and am discovering a couple of issues. Read details below


may need to get a new seat rail at junkyard--there are manuals in the library or partplace--the module for the locks is probly bad--its xpensiv-may be the oldway is all u need

Jan 15, 2015 | Seat Cars & Trucks

2 Answers

I have a 1998 chevy suburban. The dome lights don't work. checked fuse box under hood. All good. Are there other fuses on the truck?


Instrument Panel Fuse Block
The instrument panel fuse block access door is
located on the driver side edge of the instrument panel.

Pull off the cover to access the fuse block.

The vehicle may not use all of the fuses shown.

Fuses Usage
1 Rear Seats
2 Rear Accessory Power Outlet
3 Steering Wheel Controls Back light
4 Driver Door Module
5 Dome Lamps, Driver Side Turn Signal
6 Driver Side Turn Signal, Stop lamp
7 Instrument Panel Back Lighting
8 Passenger Side Turn Signal, Stop lamp
9 Passenger Door Module, Driver Unlock
10 Power Door Lock 2 (Unlock Feature)
11 Power Door Lock 2 (Lock Feature)
12 Stop lamps, Centre High Mounted Stop lamp
13 Rear Climate Controls
14 Power Mirror
15 Body Control Module (BCM)
16 Accessory Power Outlets
17 Interior Lamps
18 Power Door Lock 1 (Unlock Feature)
19 Rear Seat Entertainment
20 Ultrasonic Rear Parking Assist, Power Liftgate
21 Power Door Lock 1 (Lock Feature)
22 Driver Information Centre (DIC)
23 Rear Wiper
24 Cooled Seats
25 Driver Seat Module, Remote Key less Entry System
26 Driver Power Door Lock (Unlock Feature)

Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks

2 Answers

Hi I Have a Suzuki Grand Vitara 2003 JX. Yesterday the central locking stopped working. It unlocks, but does not lock. (not locking with the remote or the button at the driver's seat.) I checked the...


If that pull the fuse test does the same thing again, then you have a lock button that is stuck down or shorted. It's as if somebody is holding the button down constantly. Thats why it locks when you put the fuse in, then gets ignored when the signal doesnt go away.

Feb 18, 2011 | 2003 Suzuki Grand Vitara

1 Answer

1999 Ford Explorer Power Drivers Seat doesn't work. When I push and of the switches, it doesn't go up, down, forward, backward, nothing. I check the fuses under the hood and didn't find any blown. I...


Maybe you problem is with the switch, or check if power seat circuit has the regular fuse or rather one of those thermal ones.
Passenger compartment fuse panel
The fuse panel is located on the left hand side of the instrument panel facing the drivers side door.

Position 18 25A - Drivers Unlock Relay, All Unlock Relay, All Lock Relay, Power Seats

May 28, 2017 | 1999 Ford Explorer

1 Answer

2001 Chevy Tahoe, Heated seat back works but not seat bottom.


Open drivers side door and look at the end of your dash board that is faceing the door.You will see a little triangle shaped door that pops out.There are also more under the hood,drivers side in a big square box.Behind the batterie.




























Dec 30, 2009 | 2001 Chevrolet Tahoe

1 Answer

I have a 2000 mercury mountaineer. Power door locks and power seats not working. No manual. What could be the problem? a fuse?


Fuses would be the first suspect. Look for a small bread-loaf size box that contains all the fuses and relays. If a new fuse pops as soon as a seat or lock is operated, then look for a stuck motor for the seat or a shorted solenoid for a lock that was just operated. If it pops as soon as replaced, then suspect a wiring short.

Sep 08, 2009 | 1997 Mercury Mountaineer

2 Answers

Keep popping fuse on 1990 corsica...


You know whats connected to the fuse, now start systematically disconnect each component and each time you try the fuse same fault, reconnect, till you ge t to the component which you disconnect and do not blow the fuse, now you know it is in that component start tracing the wires/bulb connections. , have 10 spare fuses ready'

Aug 16, 2009 | 1990 Chevrolet Corsica

3 Answers

2001 saab 9-5 electric door lock system does not function


Most likely you have a bad TWICE unit. it is located under the driver's seat, at a low point in the floor and often gets wet.

Mar 13, 2009 | 2001 Saab 9-3

1 Answer

2001 Jeep Grand Cherokee Laredo....power windows not working, driver side power door lock not working


I have a 2000 Jeep Grand Cherokee the power windows,power seat , door would not lock , and the inside lights would stay one ..i thought it was a fuse problem but no fuses for that ... in the rubber boot between the door and frame ..the was the ground wire was split ... put a **** connector on it everything works great now ....

Jul 18, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Mercury Mountaineer Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...