Question about 1999 Chevrolet Silverado 1500

1 Answer

Still cannot reset oil light on 99 silverado

Pressed to floor 3 with key in on position engine not running ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Keep it pressed to the floor. then swich the ignition off while still. pressing to the floor turn it back on and wait 30 seconds

Posted on Aug 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

7 Answers

How do I rest oil change light on a 2001 1500 silveradeo?


Place a piece of black electrical tape over it ,problem solved .you know the oil is good

Oct 10, 2014 | 2001 Chevrolet Silverado 1500

Tip

Chevrolet service light 1991-01


Camaro

1998-01

To reset the "OIL CHANGE" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and then goes out, the system is reset.


Corvette


1997-01

To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%".


Impala,
Monte Carlo


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator three times within five seconds. If the CHG OIL SOON lights two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not been reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to exit programming. A chime will be heard to verify the exit.


Impala,
Caprice


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Lumina,
Monte Carlo,
Impala,
Caprice


1996-00,
1996-99,
1995-96,
1995-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds. The light will flash and go out.


Corvette


1990-96

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.


Chevrolet Suburban,
GMC Yukon XL,
Chevrolet Silverado,
GMC Trucks Sierra


2000-01,
1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.


Silverado, Sierra Trucks


1991-93

To reset the "CHANGE ENGINE OIL" message, turn the ignition key to the run position. Press and release the accelerator pedal three times within 5 seconds. If the light flashes for 5 seconds, the system is reset. Repeat procedure as needed.















on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

Change engine oil light will not go off


To reset the change oil reminder light, do the following;
1) turn key to RUN position, but do not start engine,
2) press accelerator pedal to the floor three times and release within 5 seconds,
3) turn key to OFF position.

If this does not reset light, repeat again.

Jan 17, 2012 | 2004 Chevrolet TrailBlazer

3 Answers

Reset check engine light after oil change


Turn the key to the on position. Not the start. And press the gas pedal all the way to the floor 3 times.

Feb 15, 2011 | Chevrolet Avalanche Cars & Trucks

3 Answers

Oil change light wont go out on a 1999 grand am


Hello Dyno.
Have you tried using this procedure to turn it off?




OIL LIFE MONITOR SYSTEM

Resetting Procedure

  1. Turn the ignition to the ON position, engine OFF.
Drivers Side I/P Fuse Block 86382201


  1. Press and release the RESET button on the drivers side I/P fuse block.
    • The CHANGE OIL indicator will start flashing.
  1. Press and hold the RESET button until an audible chime is heard and then release.
    • If the CHANGE OIL indicator comes back on, the system did not reset. Try the procedure again.

Nov 10, 2010 | 1999 Pontiac Grand Am GT

1 Answer

How do i reset the change engine oil soon light after changing oil on 2001 chevy 1500 silverado?


press the gas pedal on the floor and turn the key on then real fast mash the gas peal 3 times fast on the trird time hold it on the floor tell the oil light resets it self count to ten. should work just fine.

Oct 22, 2010 | 2001 Chevrolet Silverado 1500

3 Answers

How do you reset oil change indicator in a pontiac 2007 g5 coupe


Turn the key to the "on" position with the engine "off". Then step on the gas pedal to the floor 3 times.

Mar 04, 2010 | 2007 Pontiac G5 Gt Coupe

3 Answers

OIL LIGHT STAYS ON AFTER OIL CHANGE AND I DON'T HAVE THE OWNERS MANUAL TO GET THE RESET CODE


Try this. With the key on and the engine not running push the gas peddle to the floor and release it three times then hold it to the floor until the oil light flashes. This should reset the oil indicator light. It should not take more than about 20 or 30 seconds.Good luck.

Jun 23, 2009 | 2005 Chevrolet Trailblazer Ext

2 Answers

How do you reset the change oil light on a 99 grand am 2.4?


hi to reset the oil life remove the fuse pannel door on the drivers side of the dash and check to see if there is a RED button with RESET on it turn the key to run push the RESET button and watch the change oil light if it flashes then press and hold it till it goes out If it dosent have a RESET button turn the key to RUN ENGINE OFF pump the gas pedal 3 times with in 5sec the light will flash then go out

Jun 16, 2009 | 1998 Pontiac Grand Am

2 Answers

Change oil light


Hi...
Are 2 step to RESET the engine oil on your chevy 02.

The first one ..
Turn the key to RUN position. Engine OFF.
Them FULLY PRESS and REALESE the ACCELERATOR PEDAL
For 3 times between 5 seconds and wait until the Change OIL start blinking and goes OFF.

Now the System is reset.

The second step is.

2-- This procedure need the RADIO, if you have an aftermarket
Radio you don't be able to do.
Turn the ignition switch to ON position,
turn OFF the RADIO,
Press and hold the Tune disp, button for 5 seconds or until
Settings is displayed,
Press the seek ptype or seek pscan up and dow to scroll the main menu,
Scroll until the OIL LIFE appear on display
Press the 1prev or 2next to scroll the sub menu, RESET will be displayed , Press the TUNE disp buttom to reset,
A chime will be heard to verify the new settings and done
Will be displayed for one second.
Press the TUNE DISP to exit from the program,
A chime will be heard to verify the exit.

I hope this help on your question.
Thank you for use fixya...

Sep 24, 2008 | 2002 Chevrolet Silverado 1500HD

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...