Question about 2000 Chrysler 300M

1 Answer

I'm trying to get a key made for my 2000 chrysler 300. A fuse or relay seems to be blown preventing us from hooking the diagnostic machine up to the vehicle. Can you possibly help me troubleshoot the problem or come up with an alternative plan?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Take it some one who knows how to by pass the key and have them put in the rigth amount of resintice so that you don't have to deal with the VAT-2 anymore

Posted on Aug 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What fuse do i replace to make my windshield wipers work Chrysler 300


Highly doubt the fuse being the problem . If the fuse is blown ,that circuit has a problem , short to ground , wiper motor drawing to much amprage . Fuse's do not blow for no reason . Fuse # 18 -30 amp . under hood fuse box . There is also a relay , wiper on/off relay in same under hood fuse box . Also wiper hi/low relay ! There is also alot of electronics involved . integrated power module , front control module , plus C.A.N bus network . How to Diagnose Controller Area Network CAN . Could be wiper / washer switch , wiper motor , communication problem , module problems , Relay problem . Google chrysler intergrated power module . they have had a lot of problems with that thing .

Oct 12, 2015 | 2006 Chrysler 300

1 Answer

Have a 2000 Chrysler 300 the battery arced out now it will not turn over. Have full charge (new battery )


Arced out? Arc causes high voltage. May have fried something especially if newer vehicle. Check starter relay. May need to call upon "the guy" to diagnostic test ..about $80 to hook to machine

Oct 07, 2015 | Cars & Trucks

2 Answers

My Chrysler 300 won't start. Problem is not battery or fuses. Not getting 12 volts to 5 amp fuse (fuse is good) for control voltage to starter relay. Applied 12 volts to fuse socket with ignition s


PLease, check if the check engine light lit up when you turn the switch, if it doesn't lit up, your EMC (computer) is not getting any electricity. And that could be the reason that you the fuses are OK but it won't start.

Jan 19, 2015 | 2007 Chrysler 300

1 Answer

On that 2010 Chrysler 300 that won't start when I turn the ignition key to start the car if I let go of the key it doesn't stop it just keeps cranking, that's never happened be


residual fuel pressure may be weak--have it testd--or try to turn ignition lock on and off 3 times to build pressure for the time being--a fuse may have blown or the coil-plug wires-ignition module cud hav issues--

Dec 03, 2014 | 2010 Chrysler 300 Touring

1 Answer

I have a 2000 chrysler 300 m and the headlights won't turn on


Take a volt meter and see if you have voltage to the back of the bulb. You don't know how many people dive with one headlight out and then the other goes out and they can't figure it out.Look in the big black box under the hood and look for headlight fuse or a relay for headlight.Replace fuse or take relay and swap it with one of the same type in the box. If none of that works it is the switch or the integrated power module

Mar 03, 2013 | 2004 Chrysler 300

1 Answer

I have a 2008 chrysler 300 and I installed an alarm system. I connected the factory horn to the alarm using a relay. I installed a relay under the hood and got the power from the battery the problem is...


you have either a blown fuse or the factory wire harness isnt connected to horn first check fuse owners manual will have location and description of fuses if ok retrace your steps when you hooked horn to new alarm you disconnected wire at horn or you cut the wire to access horn wiring

hope this helps
plz vote leave a comment if need more help reply

Jan 18, 2011 | 2008 Chrysler 300

1 Answer

Heater blower doesnt work on 2005 chrysler 300


Locate the fuse pannel and check for blown fuse...If fuse not blown - check fan control relay for proper operation - If thats not the problem check for voltage at the switch.

Feb 07, 2010 | 2005 Chrysler 300

1 Answer

2000 Chrysler Town & Country Power outlet fuse (which one?)


The fuse and relay positions are cast into the under side of the 'power center' (fuse box) cover. The larger boxes are relays of various power (not related to your problem). Check the wire at the rear of the power outlet to see if it is connected. Sometimes a fuse will open due to an element crack, but not be blown. Try another when you find the correct one.

Oct 18, 2009 | 2000 Chrysler Town & Country

1 Answer

Describe your 2000 Chrysler Town &


Look for a blown fuse or bad relay for the a/c in the front fuse box. If replacing fuse and it blows again, then there is a short circuit on the load side of the fuse which goes to the a/c compressor clutch. If fuse ok, try another relay to replace the possible bad a/c unit. The engine computer controls this relay. It also receives air temperature sensor reading from cold air path.

Jul 17, 2009 | 2000 Chrysler Town & Country

Not finding what you are looking for?
2000 Chrysler 300M Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...