Question about 2002 Chevrolet TrailBlazer

2 Answers

Why is it that my low beam lights are really low

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

If your high beams are good and your low beams are not,your switch could be bad,the ground may be lost for some reason I can't say.I would have to be at the car.Changing the headlight switch probably will fix your problem.

Posted on Aug 01, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Bulbs fitted incorrectly.Or your adjustment is out.of line.Adjust them behind the lamp.good luck.

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My low beams work but my high beams wont come on. please help. I live in the country and there are alot of deer and other animaks always crossing the road.TIA


you really need to mention the vehicle make and model , but here goes --if it is a ford product check the light control module as this is where most light problems originate
other makes have the same light control module so check it as well
other than that it could be the light switch
put the lights on low beam and pull the switch handle back to flash the high beams
if they flash the high beam relay is ok --if not it may be the relay
if nothing happens it is most like ly the switch

Oct 26, 2015 | Cars & Trucks

1 Answer

Where to hook up power wire for aftermarket driving lights in 93 Nissan Maxima


if you hook the driving lights to the low beam circuit you will be in breach of traffic regulations the regulation reads that driving lights can only be operated with high beams and on selection of low beam , the lights have to go out
added to that is the clause --the driving lights most be extinguishable when on high beam by the use of a separate isolation switch
now the circuit is really simple
you place a relay for each driving light in a suitable place
you run a fused wire from the battery to the relay and then to each light
to make those relays work you connect a wire from the existing high beam relays connections(m piggy back or like connection) so that when on high beam the trigger power that puts the headlights on also triggers the driving light relays
Now to meet regulations you run ground wires for the driving lights back to a switch in the cabin then to ground

Oct 31, 2017 | Nissan Cars & Trucks

1 Answer

My low beams wont turn on. only my high beams


low beams are on with the high beams does NOT mean the bulbs are good. The low beams have two separate filaments, one that lights on low beam and one that lights on high beam. That's why the low beams have three terminals but the high beams have only two.It's entirely possible that both low beam filaments have burned out. If the bulbs really are good, then the dimmer switch is the most likely problem.

Oct 12, 2011 | 1999 GMC Suburban

3 Answers

The low beam on my honda accord 91 dont work just the hi beam


they are fussed separately possible both low beam brunt out really

Mar 10, 2010 | Honda Accord Cars & Trucks

1 Answer

2002 pathfinder, the left headlight bulb does not work when the


Sounds like you need a bulb,the daytime running lights send power to the high beam wire so they look like low beam lights are on but really they are high beam lights running on low voltage.

Nov 19, 2009 | 2002 Nissan Pathfinder

1 Answer

Hey when I flick the light switch up to main beam there is no difference in the light; does this mean my full beam lamp has blown out or could my wiring be misconnected? I dont really understand how the...


With the lights on low beam, note where the brightest part istrikes the garage door or what ever, then put it on high beam and note the brightest spot will go up and to the left. On two bulb headlightsbothe lamps work on hi and low
On4 bulb, hi beam all 4 are on and low beam only the two outside are on.

Nov 12, 2009 | Yamaha YZF-R125 Motorcycles

1 Answer

Low beam lights won't work.


Don't know that much about 99 Surburbans but you may won't to see if you could just unplug it from the cluster or maybe see if thiers a fuse for your lights that you can take out

Nov 22, 2017 | 1999 GMC Suburban

1 Answer

Drl not working nor are low beams high beams work properly


Ok look under the bagtterry tray, there is a black box bolted to the body, it is the headlight ground and has a really bad tendency to corode due to the design.

Feb 01, 2009 | 2001 Pontiac Sunfire

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...