Question about Chrysler Town & Country

2 Answers

I have a 2001 Crysler Town and Country and when I went to zero out the trip thing,the speedometer and the rpm guage needles went all the way over and now they are stuck and they don't work

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

Hold down the black plastic TRIP METER RESET switch for 10 sec and ti will go into diagnostic mode. I did this and its cool. Do it with the van turned off!

Posted on Sep 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Try disconecting your battery.Leave it disconnected for 10 mins then reconect it.Make sure you have the radio code before you do this as you will have to recode the radio.good luck hope that was help full

Posted on Aug 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals on 2001 Chrysler Town & Country cause dash lights to come on and speedometer & odometer quit working


I would say its probably a short or a ground problem at the turn switch or a wire in that area. you need a test light and probably a multi meater and some nohow a ground or wireing problem can even drive a master teck crasy.

Apr 18, 2013 | 2001 Chrysler Town & Country

1 Answer

2003 chrysler town and country will not start and guages do not work


Is the check engine light on when you turn the key switch on ?
The one thing that can affect both the gauges and the ignition circuit is the key switch.

Apr 07, 2013 | 2003 Chrysler Town & Country

1 Answer

Speedometer needle is behind pin, in a 2001 chrysler town and country. instead of buying part what else can i try?


This is an ez repair. Remove the trim around the dash of the speedometer. Unscrew and remove the plastic cover over the speedometer itself. Move the needle to it's correct position. Should take less than half an hour.

Jun 08, 2011 | 2001 Chrysler Town & Country

1 Answer

Speedometer and RPM thing not working.


Make sure you check the battery, starter, and alternator. You can take your car to autozone, napa or advance auto parts, they can check it for you for free. let me know

Oct 04, 2009 | 2003 Chrysler Town & Country

2 Answers

2001 chrysler town and country. need to reset speedometer. the speedometer is stuck on the back side of the resting pin. we have reset it before but forgot how to do it now.


Hold down the black plastic TRIP METER RESET switch for 10 sec and ti will go into diagnostic mode. I did this and its cool. Do it with the van turned off!

Sep 13, 2009 | 2001 Chrysler Town & Country

1 Answer

2001 Town & Country batterys bad/speedometer got stuck behind 0


a scanner that gets into the instrument cluster computer can reset the needles. or take the dash apart and manually turn dash cluster upsidedown, then the needles will move so rotate untill the needles are reset.

Aug 26, 2009 | 2001 Chrysler Town & Country

2 Answers

Speedometer pegs backwards from time to time on my 2001 twn&cntry


Hold down the black plastic TRIP METER RESET switch for 10 sec and ti will go into diagnostic mode. I did this and its cool. Do it with the van turned off!

May 27, 2009 | 2002 Chrysler Town & Country

1 Answer

My speedometer hand is below the peg that is supposed to stop it at zero. Help..


i had this happen what i did was got on the highway and got up to about 85 and the speed omiter went back to where it should be

Apr 06, 2009 | 2001 Chrysler Town & Country

1 Answer

Speedometer not working on 2001 town & country


i had that problem before i turned the key to on and pressed the odomiter button twice and held it down it started to run through the codes and havent had a problem with it since.

Jan 12, 2009 | 2001 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...