Question about 2000 Mazda 626

2 Answers

Intake manifold runner control stuck closed?

\mazda mpv 2000

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 154 Answers

You don't have to replaced the manifold just the runner control. see this all the time at work the part is about 175.00 and an hour and a half to install. your local dealer should be able to fix this for you

Posted on Aug 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Replace the intake manifold.

Posted on Aug 05, 2009

  • Eldric Venne
    Eldric Venne Aug 05, 2009

    Replace the intake manifold.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix code p2004 on 2005 ford focus


you code is here

P2004 Ford Intake Manifold Runner Control Stuck Open Bank 1


Possible causes - Intake Manifold Runner Control (IMRC) monitor signal shorted to power
- Faulty Intake Manifold Runner Control (IMRC) actuator
- Faulty Intake Manifold Runner Control (IMRC) solenoid
- Damage Powertrain Control Module (PCM)
- Blocked vacuum hoses
alt="What does this mean?"> What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P2004 Ford Description The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open.


Read more: http://engine-codes.com/p2004_ford.html#ixzz3lke1SreV

Sep 14, 2015 | Ford Cars & Trucks

1 Answer

P2006 ford f150


This Code means that the Intake Runner Control on Bank One is stuck closed. An intake runner is a part which acts like a gate and diverts airflow inside the Intake manifold.

Some have control rods which attach with plastic clips and the clips break causing the control rod to unseat in its place. They may use solenoids that are electric or Vacuum controlled and the rods on these devices are what moves the runners.

Often you can take the intake manifold off and clean the runner or reattach the rods.

Please rate my info.

Jan 18, 2013 | 2004 Ford F150

1 Answer

Code p1518



Trouble Code: P1518

Intake Manifold Runner Control Shutter Valve (Stuck Open)
Possible Causes:


IMRC control circuit shorted to ground or to system power (B+) . IMRC shutter valve actuator is stuck closed . IMRC vacuum hose is loose or disconnected. PCM has failed .From the Mazda Repair guides.

Aug 30, 2012 | 2000 Mazda MPV

1 Answer

I got three error code for my Mazda MPV P1518,P1520,P0306.


P1518- Intake manifold runner control fault- stuck open
p1520-intake manifold runner control fault
p0306-cylinder 6 misfire detected

good luck

May 11, 2011 | 2000 Mazda MPV

1 Answer

Mazda MPV 2001, code P1518 , and P1512, what is the problem?


After extensive searching and trial and error I found that the cause for the code 1518 on my mazda mpv was caused by the plastic clip that holds the linkage for the intake manifold runner had broke on the fire wall side and the linkage fell out causing the runner to stay open. It is very difficult to see. It is on the front( drivers side) of the engine below the upper intake manifold. Remove the air cleaner box and use a mirror and you can see it. Only about 6 inches long. Replace both clips while you are in there because it is a bear to get to. Check this first before you go through the other items like the egr. Inexpensive repair and my code 1518 and the one for randon miss fire went away never to return. Lots of power again. Good luck. Jim

Aug 30, 2010 | 2001 Mazda MPV

2 Answers

P2004


intake manifold runner stuck open. 2008 dodge avenger 2.4 how can i fix it....

Dec 13, 2009 | 2008 Dodge Avenger

1 Answer

Mazda mpv 2000


Possible problem is carbon build up in intake runners..remove top intake and clean runners..

Jun 19, 2009 | 2000 Mazda MPV

4 Answers

I need to change the 3 rear sparkplugs on my mazda mpv v6 engine?


How can I take the manifold out to change my spark plugs, in 2005 mazda mpv?

Jan 14, 2009 | 2000 Mazda MPV

Not finding what you are looking for?
2000 Mazda 626 Logo

1,675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...