Mitsu canter 4d34 engine timing marks - Mitsubishi Cars & Trucks

SOURCE: mitsubishi canter truck 4d34 torque settings

Hi!!!
Most manuals I found do not cover diesel engines. There is a Peter Russek manual for your truck which covers diesel engines. Click on the following link to check the manual http://www.auto-repair-manuals.com/Mitsubishi-1997-2002-L200-2WD-4WD-2-0L_2-4L-Petrol-2-5L-Diesel-Russek-Repair-Manual.html
THIS ARE THE SPECS FOR A 04 MITSUBISHI LANCER. Identifying Fastener Tightening Specifications Table ITEMS SPECIFICATIONS Roll stopper bracket mounting bolt69 ± 10 N.m (51 ± 7 ft-lb) Shift cable bracket mounting bolt19 ± 3 N.m (14 ± 2 ft-lb) Select lever mounting bolt19 ± 3 N.m (14 ± 2 ft-lb) Speedometer gear mounting bolt4.0 ± 1.0 N.m (35 ± 9 in-lb) Backup light switch32 ± 2 N.m (24 ± 1 ft-lb) Interlock plate bolt30 ± 3 N.m (22 ± 2 ft-lb) Poppet spring32 ± 2 N.m (24 ± 1 ft-lb) Control housing mounting bolt19 ± 3 N.m (14 ± 2 ft-lb) Under cover mounting bolt7.0 ± 1.0 N.m (61 ± 9 in-lb) Reverse idler gear shaft mounting bolt48 ± 6 N.m (35 ± 4 ft-lb) Clutch housing-transaxle case mounting bolt44 ± 5 N.m (33 ± 4 ft-lb) Front bearing retainer mounting bolt19 ± 3 N.m (14 ± 2 ft-lb) Select lever mounting nut12 ± 1 N.m (104 ± 9 in-lb) Stopper bracket mounting bolt22.3 ± 0.3 N.m (16.1 ± 0.2 ft-lb) Clutch release bearing retainer mounting bolt9.8 ± 2 N.m (87 ± 17 in-lb) Differential drive gear mounting bolt132 ± 5 N.m (98 ± 4 ft-lb)

SOURCE: Engine manual Mitsubishi 4D34

4d34 cylinder head torque