Garden Logo

Related Topics:

alex bauder
alex bauder Posted on May 24, 2018
Be the first to answer

Plastic slide locking presure hose not ingageing

On my karcher power washer I cannot engage gun to the power hose lock will not hold it

Answer This Question

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Aug 31, 2008

SOURCE: power sliding door lock

I had the power sliding side door locks recalled on my 2003 Venture at Dealers expense.

Ad

Anonymous

  • 33 Answers
  • Posted on Sep 21, 2008

SOURCE: power locks

motor in door bad or loose connection in the door

Robert Debison

  • 412 Answers
  • Posted on May 14, 2009

SOURCE: 2006 Dodge Caravan - ONE power door lock stopped working

i have replaced many sliding door lock actuators on these vehicles..dealer part..mostly on passenger side sliding door..also possible you have a broken wire in door track harness..follow wiring from door into what looks like a plastic chain in door track at door opening

Anonymous

  • 24 Answers
  • Posted on Jul 11, 2009

SOURCE: plenty of presure front washers, tailgate washer not working

It may have a seperate reservoir for the back wipers

Anonymous

  • 1 Answer
  • Posted on Aug 07, 2012

SOURCE: power door lock does not engage lock works manually

Try wiggling the electrical harness between the door and body of the truck with the door open and switch engaged.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Karcher Leaking from Back or inside...Help please
Karcher pressure washers are very sensitive to over-winter freezing. The plastic parts break, and you have to replace all of the leaking parts.
You may be missing a locking tab, without seeing the thing apart next to the exploded parts view, it's really hard to tell. Search google for "karcher parts", and put in your model number...
Read full answer
Aug 03, 2015 • Karcher Garden
0helpful
1answer

Karcher k3.575 high pressure quick connect high pressure hose not locking
clean out the dirt and check the hose support that likes to slides down to the end of the hose
Read full answer
Mar 20, 2012 • Karcher K3.68MR Electric Pressure Washer
0helpful
1answer

Why dose my Karcher K2.35 keep blowing the gun hose off?
There is a good chance you are missing the black plastic clip that holds the hose into the trigger gun. If you look at where the hose goes into the gun there should be a flat slot where a black plastic clip would slide in and keep the hose into the trigger gun.
Read full answer
Oct 24, 2010 • Karcher 2500 PSI Pressure Washer
0helpful
1answer

Engine runs great, when i turn the hose on it dies.if i hold the trigger and start engine it runs, as soon as i release trigger the engine dies
Make sure thre is no air lock in the system line. So first of all use a clean line to wash off and blow out any dirt in the spray gun.
make sure the engine is having good fuel and power it on to run and warm up . let it run over without any load on it . Now turn the hose on it and power it on slowing, do not stop but keep it running to power spray . The accumulated dirt might come off and make the run smooth after some time.
Read full answer
Sep 18, 2010 • Karcher 2500 PSI Pressure Washer
0helpful
2answers

I can use my Karcher K3 jet wash as long as i hold trigger down
Most pressure washers have ball lock type fittings on the hose connections. What happens is the little steel balls get a bit of corrosion and do not lock the male fitting properly with the female coupling. Load up the fitting with some Oil or WD 40. Then connect and disconnect the fitting several times to losen up the balls and springs. Should the spring in the coupling break you will get the exact symptom your describing.

If the OIL / WD 40 does not do the trick then you may have to change out the quick disconnect coupling.

Kelly
Read full answer
Apr 18, 2010 • Karcher PSI Electric Pressure Washer
0helpful
1answer

Powerwasher hose to gun keeps blowing off when i pull the trigger of gun. the connection at the washer
Somewhere on the nozzle there is a lock. You must properly seat and lock the nozzle. Otherwise, guess what happens.

If you have done all this, I must surmise the lock is broken or has dirt in it.

Clean it real good - wash it out with water - and try again.

Hope this helps

a
Read full answer
Sep 21, 2009 • Karcher K2.26 Electric Power Washer
0helpful
2answers

Unable to connect high pressure hose to gun base on Karcher 3.99M
I am presuming when you insert the wand that you are also twisting it into place?
The click usually occurs when the wand is twisted and it locks. Simply pushing it in without twisting will cause water to flow big time as it's not sealed.
If you are doing all correct then the seal is damaged and should be returned for a warranty claim
Read full answer
Jul 21, 2009 • Karcher Garden
0helpful
2answers

I cannot put the cable in the power jet handle it will not go in
Please call us at www.rjbowers.com to have someone help with the problem. It sounds like the hose will not attach to the trigger gun. Have trigger gun near when you call 1-800-383-6584 to help solve your problem.
Read full answer
May 11, 2009 • Karcher K2.26 Electric Power Washer
2helpful
2answers

Karcher K 3.68 M operation
These units have pressure valves that automatically turn off the pump once the pressure is high enough. The pressure switches do fail and sometimes stick and act as you've described.
Read full answer
May 07, 2009 • Alfred Karcher K 5.93 M Electric Pressure...
0helpful
1answer

How do i connect the hose to the karcher k399 handle
Pop out the plastic tab at the base of your gun (use point of screwdriver/knife).
Then push the hose connection into the gun and push the plastic tab back into it's slot. This will hold the hose in place.
Read full answer
Jul 02, 2008 • Karcher 2500 PSI Pressure Washer
Not finding what you are looking for?

View Most Popular

Garden

Related Question

Karcher Leaking from Back or inside...Help please

  • Karcher Garden

37 views

Ask a Question

Usually answered in minutes!

Popular Questions

When adding SAE 30 oil to new pw, do we add to the

Briggs & Stratton Prosumer 2800 PSI...

My Husqvarna Hydrostatic transmission is not

Husqvarna Lawn Tractor 48" Deck, 23...

My Ryobi weedeater engine keeps stalling out.

Ryobi Garden

Craftsman weedwacker won't start

Craftsman 25cc Gas Line Trimmer

Tighten chainsaw chain

Remington Electric Chain Saw

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Karcherk5540k5740manual_2.pdf....

Karcher K5.540 2,000...

PDF Manual
WEEI2011_NAen_FL26C_579178701.pdf....

Weed Eater Fl26...

PDF Manual
MvBXD-Pump-Parts.pdf. user-manual-BXD...

Comet BXD 2525 G...

Loading...