Question about 1994 Volvo 850

2 Answers

Gas door is locked and don't know how to open

When the gas door closed all the way it locked and I don't know how to open it

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Open the holstery in the trunk, you will find a pull ring, just pull it and the gas lid will pop open.

Alf Pousar

Posted on Aug 31, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My wife just recently called me with the same problem with her car, a1997 850 glt. The remote door control was set to lock. Try hitting the button for the locks or putting the key in the ignition and try the gas door.

Posted on Sep 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get the gas cap door open


Think its been jammed shut ,ask a local mechanic to have a look ,it might need prising open with a big screwdriver

Dec 27, 2013 | 2000 Volkswagen Golf

1 Answer

Chrysler town and country electric door locks don't work


Do the windows work? Does the door lock work on either front door?

Oct 06, 2012 | 2005 Chrysler Town & Country

1 Answer

1996 BMW 740 il the front passanger side door is closed, lock broke and don't know how to get panel off,


If you can't get the door open then you can't get the panel off its as simple as that, there are screws under the door card that need to be removed to gain access to the inner door workings, without getting the door open you would have to remove the wing to gain access to the hinge bolts & remove the whole door from the vehicle, then you may still have problems with the door having its mechanism locked around the door frames pin or loop

Sep 13, 2012 | BMW Cars & Trucks

2 Answers

I have a 2007 Toyota RAV 4 I can't get the remote to work after changing the battery does it have to be reset if so what has to be done. I can lock and unlock the doors manualy but not with the remote...


1. get in the car
2. shut the door
3. place the key in the ignition
4. lock the doors, manually
5. turn the ignition to on then off...do this seven times
6. unlock the doors and try your remote

Sep 20, 2011 | 2006 Toyota RAV4

1 Answer

Driver's door won't open inside or out. Power locks work but inside and outside handles dont release latch. Can I get door panel off in the closed position, otherwise any way to open door


Hey, You need to remove the panel otherwise u can't reattach the metal sticks that move the locks, but i think it's hard to remove it in a closed posision when u don't brake it

May 16, 2011 | Saturn Vue Cars & Trucks

1 Answer

Passenger door lock does not lock or unlock. It is moving just a little but not enough to lock or unlock the sliding door. The rods are not being restricted in any way. 2006 t&c, dual sliding side...


If it´s the passenger side where the gas tank fill is, there is a automatic safety device that locks the sliding door, that prevents to open the door while filling gas, be sure that the folding cover of the gas tank is fully closed and nothing is jammed inside

Aug 13, 2010 | 2006 Chrysler Town & Country

1 Answer

Door lock will not close


Check to see if you or someone brushed up against the lock and it is in the closed position. If it is simply push the lock lever back to the open position.

Jan 10, 2010 | 2001 Chevrolet Blazer

4 Answers

How to program the orginal remote camry key2003


I found this on the internet try it it MAY work.

Start with the key out of the ignition. Open the driver door (all other doors are closed). Driver door is unlocked (other doors don’t matter).


Perform these steps within 5 seconds
Insert the key into the ignition (don’t turn it)
Insert the key into the ignition (don’t turn it)


Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition (don’t turn it) and pull it out.


Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition and leave in the ignition.
Close the drivers door
Turn the ignition to ON (as far as you can go without cranking the engine), then back to off .
Remove the key from the ignition.


Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.


Perform these steps within 40 seconds
Press the lock and unlock buttons on the transmitter simultaneously for 1.5 seconds
Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted.


Open drivers door

Dec 18, 2009 | 2003 Toyota Camry

1 Answer

A friend of mine has a Lexus 1997 ES and his remote control needs reprogramming. How do I do it for him. Thank you so much.


1. Driver's doo opend and unlocked, all other doors closed and locked
2. Inser Your key in ignition, don not turn, remove key
3. using the manual lock/unlock button on ther dirvers door, slowly press lock and unlock 5 times (count the lock 5 times and unlock 5 times)
4. Shut door
5 Open door
6. Using the lock/unlock button on the direvers door, slowly press and unlock 5 times (count the lock 5 times and the unlock 5 times)
7. With the door open insert you key into the ignition, turn to ON position (don't start), wait 5 seconds. Trun off and remove key.
8. Locks should cycle once (Car will lock and unlock once). If they don't cycle or they cycle more that once, do stips 1-7 over.
9. Using the remote, push lock button, hold for 1 second, release. The locks should cycle once. If not start over and go slower.
10 Close the door. Open the door. Press the lock button on the remote. The locks should cycle. Close the door. Press the lock button on the remote, the doors should lock. Press again and the doors shoud unlock.

I got this from a site called FixYa (don't have URL). It took me a few tries but it worked like a charm.

Sep 24, 2009 | 1997 Lexus ES 300

Not finding what you are looking for?
1994 Volvo 850 Logo

475 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...